Adjusting the Saddle Stitch Fold Placement

If you notice that the folds of the paper are not in the center of the booklet, but the stitches are in the center, you can make adjustments to the saddle stitch fold placement on the custom paper type.

This mode can be set when the Booklet Finisher-W PRO/Booklet Finisher-AC is attached. (See "Staple Finisher-W PRO/Booklet Finisher-W PRO/Puncher Unit-BT/Puncher Unit-BU" and "Staple Finisher-AC/Booklet Finisher-AC/2/4 Hole Puncher Unit-A/4 Hole Puncher Unit-A.")

IMPORTANT
This function is displayed only if the settings are made available by your local authorized Canon dealer. Even if this function is displayed, do not allow anyone to change the settings except for the system manager. For more information on changing the settings, contact your local authorized Canon dealer. If both the folds and stitches are not in the center of the booklet, adjust the alignment of the folding position and stitching position in [Adj. Saddle Stitch Fold Pos.], and then adjust the stitching position and folding position in [Change Fold/Stitch Position]. While only the folding position can be adjusted in [Adj. Saddle Stitch Fold Pos.], both the stitching position and folding position can be adjusted in [Change Fold/Stitch Position]. To adjust the stitching position, see "Adjusting the Saddle Stitch Position."

IMPORTANT

This function is displayed only if the settings are made available by your local authorized Canon dealer. Even if this function is displayed, do not allow anyone to change the settings except for the system manager. For more information on changing the settings, contact your local authorized Canon dealer.

If both the folds and stitches are not in the center of the booklet, adjust the alignment of the folding position and stitching position in [Adj. Saddle Stitch Fold Pos.], and then adjust the stitching position and folding position in [Change Fold/Stitch Position]. While only the folding position can be adjusted in [Adj. Saddle Stitch Fold Pos.], both the stitching position and folding position can be adjusted in [Change Fold/Stitch Position]. To adjust the stitching position, see "Adjusting the Saddle Stitch Position."

Press

Press [Preferences] → [Paper Settings] → [Paper Type Management Settings].

Select the paper type that you want to edit from the list → press [Details/Edit].

Press [Change] for <Adj. Saddle Stitch Fold Pos.>.

Press [

] or [

] to adjust the saddle stitch fold placement → [OK].

If you want the saddle fold to shift to the right, increase the setting value.

If you want the saddle fold to shift to the left, decrease the setting value.

Press [OK].