Adjusting the Saddle Stitch Position

If you notice that the folds of the paper are not exactly in the middle of the booklet, you can make fine adjustments to the saddle stitch position of the custom paper type.

This mode is available if theBooklet Finisher-W PRO or Booklet Finisher-AC is attached. (See "Staple Finisher-W PRO/Booklet Finisher-W PRO/Puncher Unit-BT/Puncher Unit-BU" and "Staple Finisher-AC/Booklet Finisher-AC/2/4 Hole Puncher Unit-A/4 Hole Puncher Unit-A.")

IMPORTANT
This function is displayed only if the settings are made available by your local authorized Canon dealer. Even if this function is displayed, do not allow anyone to change the settings except for the system manager. For more information on changing the settings, contact your local authorized Canon dealer. If the Booklet Finisher-W PRO/Booklet Finisher-AC is attached, you can adjust both the stitch position and fold placement. If both the folds and stitches are not in the center of the booklet, adjust the alignment of the folding position and stitching position in [Adj. Saddle Stitch Fold Pos.], and then adjust the stitching position and folding position in [Change Fold/Stitch Position]. While only the folding position can be adjusted in [Adj. Saddle Stitch Fold Pos.], both the stitching position and folding position can be adjusted in [Change Fold/Stitch Position]. To adjust the fold placement, see "Adjusting the Saddle Stitch Fold Placement."

IMPORTANT

This function is displayed only if the settings are made available by your local authorized Canon dealer. Even if this function is displayed, do not allow anyone to change the settings except for the system manager. For more information on changing the settings, contact your local authorized Canon dealer.

If the Booklet Finisher-W PRO/Booklet Finisher-AC is attached, you can adjust both the stitch position and fold placement.

If both the folds and stitches are not in the center of the booklet, adjust the alignment of the folding position and stitching position in [Adj. Saddle Stitch Fold Pos.], and then adjust the stitching position and folding position in [Change Fold/Stitch Position]. While only the folding position can be adjusted in [Adj. Saddle Stitch Fold Pos.], both the stitching position and folding position can be adjusted in [Change Fold/Stitch Position]. To adjust the fold placement, see "Adjusting the Saddle Stitch Fold Placement."

Press

Press [Preferences] → [Paper Settings] → [Paper Type Management Settings].

Select the paper type that you want to edit from the list → press [Details/Edit].

Press [Change] for <Change Fold/Stitch Position>.

Press [

] or [

] to adjust the saddle stitch position → [OK].

If you want the saddle stitch position to shift right toward the printing surface, increase the setting value.

If you want the saddle stitch position to shift left toward the printing surface, decrease the setting value.

Press [OK].