Setting IPv4 Address
1660-00W
 | The machine's IPv4 address can be either assigned automatically by a dynamic IP addressing protocol, such as DHCP, or entered manually. When connecting the machine to a wired LAN, make sure that the connectors of the LAN cable are firmly inserted into the ports (Connecting to a Wired LAN). You can test the network connection if necessary. |
Setting IPv4 Address
1
Select <Menu> in the Home screen. Home Screen
2
Select <Preferences> 
<Network>.
<Network>.If the login screen appears, enter the correct ID and PIN. Logging in to the Machine
3
Select <TCP/IP Settings> <IPv4 Settings> <IP Address Settings>.
<IPv4 Settings> <IP Address Settings>.4
Configure IP address settings.
<Auto Acquire>
Select to automatically assign an IP address via DHCP protocol. When <On> is displayed, automatic addressing is enabled.
Select to automatically assign an IP address via DHCP protocol. When <On> is displayed, automatic addressing is enabled.
<Manually Acquire>
Select to configure the IP address settings by manually entering an IP address. In order to select this option, the automatic acquirement must be set to <Off>.
Select to configure the IP address settings by manually entering an IP address. In order to select this option, the automatic acquirement must be set to <Off>.
<Check Settings>
Select when you want to view the current IP address settings.
Select when you want to view the current IP address settings.
Automatically assigning an IP address
1 | Select <Auto Acquire>. |
2 | Select the protocol. Touch panel modelSelect <On> in <Auto Acquire>, and select <Select Protocol> <DHCP>. Black and white LCD modelSelect <Select Protocol> <DHCP>. If you do not want to use DHCP/BOOTP/RARP to assign an IP address Select <Off>. If you select <DHCP> when these services are unavailable, the machine will waste time and communications resources searching the network for these services. |
3 | Check that <Auto IP> is set to <On>. If <Off> is selected, change the setting to <On>. |
4 | Select <Apply>. |
IP addresses assigned via DHCP override the address obtained via Auto IP.
Manually entering an IP address
1 | Configure a setting to disable auto-acquisition. Touch panel modelSelect <Auto Acquire>, and select <Off> in <Auto Acquire> <Apply> <OK>. Black and white LCD modelSelect <Auto Acquire>, and set both <Select Protocol> and <Auto IP> to <Off>. |
2 | Select <Manually Acquire>. |
3 | Specify the IP address, subnet mask, and gateway address (or default gateway). Touch panel modelEnter <IP Address>, <Subnet Mask>, and <Gateway Address>, and select <Apply>. Black and white LCD modelEnter these values in each screen using the numeric keys, and press  . |
5
For the touch panel model, select <OK>.
6
Restart the machine. Restarting the Machine
 |
Checking whether the settings are correctMake sure that the Remote UI screen can be displayed with your computer (Starting Remote UI). If a computer is not available, you can check the connection by using the operation panel (Testing the Network Connection). When you have changed the IP address after installing the printer driverYou need to add a new port. Configuring Printer Ports |
Testing the Network Connection
1
Select <Menu> in the Home screen. Home Screen
2
Select <Preferences> <Network>.
<Network>.If the login screen appears, enter the correct ID and PIN. Logging in to the Machine
3
Select <TCP/IP Settings> <IPv4 Settings> <PING Command>.
<IPv4 Settings> <PING Command>.4
Enter the IPv4 address of another device on the network, and press <Apply> ().
).If a proper connection has been established, <Received response from the host.> is displayed.