Viewing Network Settings
|
The IP address is not correctly configured if it is displayed as "0.0.0.0". Connecting the machine to a switching hub or bridge may result in a connection failure even when the IP address is correctly configured. This problem can be solved by setting a certain interval before the machine starts communicating. Setting a Wait Time for Connecting to a Network You can print a list of the current network settings. User Data List/System Manager Data List |
Viewing IPv4 Settings
<Status Monitor> (
) 
<Network Information> <IPv4> Select the setting to view Check the settings
) <Network Information> <IPv4> Select the setting to view Check the settingsViewing IPv6 Settings
<Status Monitor> () <Network Information> <IPv6> Select the setting to view Check the settings
) <Network Information> <IPv6> Select the setting to view Check the settingsViewing the MAC Address for Wired LAN
1
Select <Menu> in the Home screen. Home Screen
2
Select <Preferences> <Network>.
<Network>.If the login screen appears, enter the correct ID and PIN. Logging in to the Machine
3
Select <Ethernet Driver Settings>.
The MAC address is displayed.
Viewing the MAC Address and Information for Wireless LAN
1
Select <Menu> in the Home screen. Home Screen
2
Select <Preferences> <Network>.
<Network>.If the login screen appears, enter the correct ID and PIN. Logging in to the Machine
3
Select <Wireless LAN Settings>.
4
Read the message that is displayed, and select <OK>.
5
Select <Connection Information>/<Wireless LAN Information>.
6
Select the setting to view.
Viewing security information
To view WEP and WPA/WPA2-PSK information, use the following procedure.
Touch panel model
Select <Security Settings>.
Black and white LCD model
<Security Settings> Select the displayed security protocol Select the setting to view
Select the displayed security protocol Select the setting to viewViewing from the <Status Monitor> screen
<Wireless LAN Status> and <Latest Error Information> can be viewed from <Status Monitor> ().
). Touch panel model
<Status Monitor> <Network Information> <Network Connection Type> Select the setting to view
<Network Information> <Network Connection Type> Select the setting to viewBlack and white LCD model
<Network Information> <Network Connection Method> <Connection Information> Select the setting to view