Manually Setting the Options of the Device
If the device is connected by uni-directional communication, the options of the device must be set manually.
Prerequisites
Procedures
1.
Open [System Settings] in macOS → click [Printers & Scanners] in the sidebar.
2.
Select the device to use.
3.
In the displayed dialog, click [Options & Supplies].
4.
In the displayed dialog, click the [Options] tab.
5.
Set the options of the device → click [OK].
NOTESelect only the options that are actually installed in the device.
Set [Function Version] to the version displayed on the configuration page printed from the control panel of the device.
Select the version of the platform installed in the device in [Platform Version]. If [Platform Version] is not set correctly, some print settings may not be able to be used.
Confirm [Platform Version] in the control panel of the device.
For information on operating the device, check the manual of the device.