<Adjust Image Quality>

This section describes how to adjust image quality for copying and printing.
<Auto Adjust Gradation>
 (Settings/Registration)  <Adjustment/Maintenance>  <Adjust Image Quality>
If the gradation of the printing is significantly different from the original document, this correction adjusts the printing so that it more closely matches the original document. Adjusting Gradation
<Correct Density>
 (Settings/Registration)  <Adjustment/Maintenance>  <Adjust Image Quality>
If the density of the printing is significantly different from the original document, this adjusts the scan density to be closer to the original. Adjusting Density
<Fine Adjust Zoom>
 (Settings/Registration)  <Adjustment/Maintenance>  <Adjust Image Quality>
If the size of the image copied is significantly different from the original document, fine adjustment is performed so that the printing more closely matches the size of the original document. Adjusting Image Size
<Waterdrop Pattern Prevention Mode>
 (Settings/Registration)  <Adjustment/Maintenance>  <Adjust Image Quality>  <Special Processing>
You can set <Waterdrop Pattern Prevention Mode> for when a splattered image, white patches, streaks, etc. appear on the halftone images of two-sided print jobs. Setting the Waterdrop Pattern Prevention Mode
<Fogging Prevention Mode>
 (Settings/Registration)  <Adjustment/Maintenance>  <Adjust Image Quality>  <Special Processing>
If toner is lightly applied to an unprinted area (white area), you may be able to correct it by setting <Fogging Prevention Mode>. Setting the Fogging Prevention Mode
<Adjust Fixing Level for Envelopes>
 (Settings/Registration)  <Adjustment/Maintenance>  <Adjust Image Quality>  <Special Processing>
When printing on envelopes, if their flaps are glued (which they should not be) or toner fixation is poor, you can adjust the fixing level. Adjusting the Fixing Level for Envelopes
<Correct Fixing for Jobs with MP Tray (Heavy 4)>
 (Settings/Registration)  <Adjustment/Maintenance>  <Adjust Image Quality>  <Special Processing>
This mode improves the print result when the image is faint because insufficient toner is fixed to the paper. Improving the Fixing Performance When Feeding Heavy 4 Paper from the Multi-Purpose Tray
<Adjust Standard Density>
 (Settings/Registration)  <Adjustment/Maintenance>  <Adjust Image Quality>
If the density of the printing is significantly different from the original document, this adjusts the overall density of the printed material to be closer to the original, including filled areas, text, lines, and intermediate densities. Adjusting Standard Density
69LF-0HU