Setting the Department ID Management
You can control access to the machine by using multiple IDs for multiple users or groups. If a user tries to operate the machine when Department ID Management is enabled, a logon screen is displayed, and the user must enter their own Department ID and PIN to use the machine. Department ID Management provides recorded details of the past use of the machine for each Department ID. To configure Department ID Management, register department IDs as necessary and then enable Department ID Management function. Additional settings are required if you want to enable Department ID Management for printing from a computer.
|
To manage the print status of each department |
Registering/Editing Department ID and PIN
Register a Department ID and set a PIN for it. Register all the department IDs to be managed.
1
Start the Remote UI and log on in Management Mode.
Starting Remote UI2
Click [Settings/Registration].
3
Click [Department ID Management] and register or edit Department IDs.
Registering a Department ID
1 | Click [Register New Department]. |
2 | Specify the required settings and click [OK]. [Department ID] Enter the Department ID number to be registered. [Set PIN] To set a PIN, select the check box and enter the same number both in the [PIN] and [Confirm] text boxes. |
Editing the settings of the registered Department ID
1 | Click the corresponding text link under [Department ID] to edit. |
2 | Change the settings as necessary and click [OK]. |
Deleting a Department ID
Click [Delete] on the right of the Department ID you want to delete
click [OK].
Enabling the Department ID Management
After you register as many Department IDs as necessary, enable Department ID Management.
1
Start the Remote UI and log on in Management Mode.
Starting Remote UI2
Click [Settings/Registration].
3
Click [Department ID Management]
[Settings].
4
Select the [Enable Department ID Management] check box and click [OK].
[Enable Department ID Management]
Select the check box to enable Department ID Management. If you do not want to use Department ID Management, clear the check box.
|
If Department ID Management is enabledWhen users try to print a file in the USB memory device or a document stored on the SD card from the operation panel, the authentication screen is displayed. Enter the Department ID and PIN, select <Log In>, and press . | |
To log on to the Remote UI in General User Mode, you must enter the Department ID and PIN. Starting Remote UI |
When the XPS Printer Driver Is Used
If you want to use Department ID Management when the XPS printer driver is used, set key pairs for TLS encrypted communication (
Using TLS for Encrypted Communications). After completing the settings of key pairs, configure the settings shown below.
Log on to the Remote UI in Management Mode (
Starting Remote UI)
[Settings/Registration]
[Network]
[TCP/IP Settings]
[Edit] in [Department ID Management PIN Confirmation Settings]
Select the [Use Department ID Management PIN Confirmation] check box
[OK]
[Use Department ID Management PIN Confirmation]
If you select the check box, Department ID Management will be enabled for printing with the XPS printer driver. If you do not want to use Department ID Management, clear the check box.
Setting the Department ID Management for Printing from the Computer
If you want to enable Department ID Management for printing from a computer, you need to specify settings by using the printer driver you already installed on the computer. Specify the Department ID and PIN as necessary.
|
To perform the following procedure, log on to your computer with an administrator account. |
1
2
Right-click the printer driver icon for this machine and click [Printer properties] or [Properties].
3
Click the [Device Settings] tab and specify the required settings.
1 | Select [Department ID Management] in [User Management], and then click [Settings] located below. |
2 | Specify the settings as necessary and click [OK]. [Allow PIN Setting] Select the check box to enable the PIN setting. [Department ID] Enter the Department ID number. [PIN] Enter the PIN corresponding to the Department ID as necessary. [Verify] Click to verify that the correct ID and PIN are entered. This function is not available if the machine and the computer are connected via a USB or WSD (Web Services on Devices) port. [Confirm Department ID/PIN When Printing] Select the check box to display the [Confirm Department ID/PIN] pop-up screen each time you print from a computer. [Authenticate Department ID/PIN at Device] Select the check box if the machine and the computer are connected via a USB or WSD port. |
3 | Click [OK]. |
|
Logging on to the machineWhen you try to print from a computer when Department ID Management is enabled, the following pop-up screen is displayed (unless the [Confirm Department ID/PIN When Printing] check box is cleared): | | |
|
Blocking Jobs When Department ID Is Unknown
The factory default settings are such that even when Department ID Management is enabled, you can print from a computer without entering an ID and PIN. If you want to change this so that printing is not possible unless an ID and PIN are entered, use the following procedure.
1
Start the Remote UI and log on in Management Mode.
Starting Remote UI2
Click [Settings/Registration].
3
Click [Department ID Management]
[Settings].
4
Clear the [Accept Print Jobs With Unknown IDs] check box and click [OK].
If you clear the check box, users cannot print by a method that is not supported by Department ID Management or perform Direct Print from the Remote UI that the users log on in Management Mode.
LINKS