<Send>

All the settings related to sending faxes or scanned originals are listed with descriptions. Default settings are marked with a dagger (


Asterisks () Settings marked with "1" may not be displayed depending on the model you are using, options, or other setting items. Settings marked with "2" may be unavailable or vary or have different defaults depending on your country or region. Settings marked with "3" cannot be imported or exported.

<Common Settings>

Specify the confirmation method used to restrict destinations at the time of sending faxes, e-mails, or I-Faxes or to prevent transmission errors.

<Restrict New Destinations>

Select whether to limit the fax numbers and e-mail/I-Fax addresses that can be specified as destinations to those already registered in the Address Book. Restricting New Destinations that Can Be Specified

<Off>

<On>

<Restrict Resending from Log>

Select whether to prevent a destination from being selected from the sent job logs. Disabling Use of Previously Used Destinations

<Off>

<On>

<Confirm When Coded Dial TX>

Select whether to display the details of an entered coded dial number when it is selected as a destination. Displaying Destinations in Address Book

<Off>

<On>

<Confirm Dest. Before Sending>

Specify whether to display the destination confirmation screen when sending faxes, e-mails, or I-Faxes. If <Only for Sequential Broadcast> is selected, the confirmation screen is displayed only when multiple destinations are specified. Checking Destinations when Sending Data

<Off>

<On>

<Scan and Send Settings>

You can change and register the settings for sending faxes or scanned documents.

<Register Unit Name>

Register the sender name for e-mails and I-Faxes. The registered name is displayed in e-mails, along with the e-mail address. If the sender name is not registered, only the e-mail address is displayed.

<Menu>

<Send>

Enter the sender name

<Apply>

<E-Mail Settings>

Change the default settings used for scanning originals to send as e-mails.

<Change Default Settings (E-Mail)>

Specify settings used for scanning originals to send as e-mails. The selected settings are used as the default settings when scanning originals. Changing the Default Settings for Functions

<Auto>

<A4>

<A4R>

<A3>

<A5>

<A5R>

<B4>

<B5>

<B5R>

<8K>

<16K>

<16KR>

<LTR>

<LTRR>

<LGL>

<STMT>

<STMTR>

<EXEC>

<11x17>

<PDF>

<None>

<Acrobat 9.0 or Equivalent/256-bit AES>*1

<Acrobat 10.0 or Equivalent/256-bit AES>*1

<None>

<Off>

<On>

<JPEG>

<TIFF>

<Off>

<On>

Nine Levels

<Text>

<Photo>

<Off>

<On>

<2-Sided Original>*1

<Off>

Seven Levels

<Small: Memory Priority>

<Large: Image Quality Priority>

<None>

<Low>

<High>

<I-Fax Settings>

Specify the basic settings for using the machine as a I-Fax device.

<Change Default Settings (I-Fax)>

You can change the default settings used for sending I-Fax. The selected settings are used as the default settings when scanning originals. Changing the Default Settings for Functions

<Auto>

<A4>

<A4R>

<A3>

<A5>

<A5R>

<B4>

<B5>

<B5R>

<8K>

<16K>

<16KR>

<LTR>

<LTRR>

<LGL>

<STMT>

<STMTR>

<EXEC>

<11x17>

Nine Levels

<Text>

<Photo>

<Off>

<On>

<2-Sided Original>*1

<Off>

Seven Levels

<None>

<TX Terminal ID>

Information such as the date and time of transmission and the e-mail address of the machine (sender information) can be added as a header in transmitted documents. This information tells the recipient when the I-Fax was sent and who sent it.

<Off>

<On>

<Menu>

<Send>

<I-Fax Settings>

Select <On> in <Add TX Terminal ID>

Select <Inside Image Area> or <Outside Image Area>

<Apply>

<File Settings>

Change the default settings used when originals are saved to a shared folder or FTP server.

<Change Default Settings (File)>

You can change the default settings used when originals are saved to a shared folder or FTP server. The selected settings are used as the default settings when scanning. Changing the Default Settings for Functions

<Auto>

<PDF>

<None>

<Acrobat 9.0 or Equivalent/256-bit AES>*1

<None>

<Off>

<On>

<JPEG>

<TIFF>

<Off>

<On>

Nine Levels

<Text>

<Photo>

<Off>

<On>

<2-Sided Original>*1

<Off>

Seven Levels

<Small: Memory Priority>

<Large: Image Quality Priority>

<Fax Settings> *1

Specify the basic settings for using the machine as a fax device.

<Change Default Settings (Fax)>

Specify settings used for sending faxes. The selected settings are used as the default settings when scanning originals. Changing the Default Settings for Functions

<200 x 100 dpi (Normal)>

<200 x 200 dpi (Fine)>

<200 x 200 dpi (Photo)>

<200 x 400 dpi (Superfine)>

<400 x 400 dpi (Ultrafine)>

Nine Levels

<2-Sided Original>*1

<Off>

Seven Levels

<Off-Hook Alarm>

Select whether the machine makes an alert sound when the handset of a telephone connected to the machine is not properly set on the cradle. You can also adjust the volume of the alert sound.

to 3

<Menu>

<Send>

<Off-Hook Alarm>

Select the volume of the alert sound

<Apply>

<ECM TX>

Enable or disable error correction mode (ECM). ECM checks for fax data errors and corrects them. To reduce errors on received faxes, see <ECM RX>.

<Off>

<On>

<Menu>

<Send>

<On>


ECM must be enabled on both the machine and the other fax device because error checks are performed on both the sending and receiving devices. Even when ECM is enabled, errors may occur due to telephone line conditions. It may take a longer time than usual to process data when ECM is enabled because the error checks and corrections are performed while the data is transmitted.

<Set Pause Time> *2

For example, when you make calls by dialing "0 - (pause) - (telephone number)," 0 is dialed first and then a few seconds later, the telephone number. When sending faxes overseas, you need to specify destinations by dialing "(international access code) - (country code) - (area code) - (fax number)" but consecutive numbers that are input without pauses may not be recognized correctly. In this case, try adding a pause after the international access code or the fax number. If the code or the number is still not recognized correctly, change the duration of the pause. For instructions on how to enter a pause, see step 4 on Basic Operations for Sending Faxes.

1 to 4

to 15 (sec.)

<Menu>

<Send>

Specify the duration of pause

<Apply>

<Auto Redial> *2

Specify settings for Auto Redial, a function that automatically redials the fax number after several minutes if the first attempt fails because the line is busy. You can specify how many times the machine redials and the interval between redials.

1 to 2

to 10 (time(s))

to 99 (min.)

<Off>

<On>

<Menu>

<Send>

Select <On> in <Use Auto Redial>

Specify the settings

<Apply>

<Number of Times to Redial>
Specifies how many times the machine redials. Enter a number, and select <Apply>.

<Redial Interval>
Specifies the interval between redials. Enter a number for the interval, and select <Apply>.

<Redial When Error Occurs>
When set to <On>, specifies to redial when a transmission error occurs.

<Check Dial Tone Before Send> *2

Select whether to check the dial tone before a fax number is dialed.

<Off>

<On>

<Menu>

<Send>

<On>

<Set Line>

Specify a fax number, unit name, and line type.

<Register Unit Tel. Number>

<Register Unit Name>

Register the name of a company or person (Registering the Fax Number and Unit Name). The registered name is sent as sender information to the destination (<TX Terminal ID>).

<Select Line Type> *2

Select the telephone line type used for fax transmission. Connecting the Telephone Line

<Rotate Img to Send(Long Edge)>

Select whether to rotate the original that is set sideways by 90 degrees and send automatically.

<Off>

<On>

<Menu>

<Send>

Select <Off> or <On>

<TX Start Speed>

If it takes time to start sending originals, such as when there is a poor connection, you can adjust the transmission start speed downward incrementally.

<33600 bps>

<14400 bps>

<9600 bps>

<7200 bps>

<4800 bps>

<2400 bps>

<Menu>

<Send>

Select a communication start speed

<R-Key Setting>

If your machine is connected through a PBX (Private Branch Exchange), it is necessary to set the access method. If you set it to <PBX>, the <R> key will be displayed on the Fax Basic Features screen. If you register the outside line access number to the <R> key, you can easily access the outside line.

<PSTN>

<PBX>

<Code>

<Menu>

<Send>

<R-Key Setting>

<PBX>

Select <Prefix> or <Hooking>

Enter the outside line access number if you select <Prefix>

<Apply>

<PBX>

Select <PBX> when you want the machine to be connected through a PBX (Private Branch Exchange). Set the function of the <R> key displayed on the Fax Basic Features screen to <Prefix> or <Hooking>. If you select <Prefix>, register the prefix code on the next screen. Enter the prefix code using the numeric keys, select <Pause>, and then select <Apply>. If you do not insert a pause, the prefix code is not registered.

<Archive TX Document> *3

In addition to the destination specified when the fax is sent, you can specify whether faxed documents are also sent to a preset storage address for archiving. Saving a Copy of a Sent Original

<Off>

<On>

<Confirm Entered Fax Number>

Select whether to display the details of an entered coded dial number when it is selected as a destination. Confirming the Entered Fax Number

<Off>

<On>

<Allow Fax Driver TX>

Enable or disable PC faxing (sending faxes from a computer). Restricting Fax Sending from a Computer

<Off>

<On>

<Restrict Sequential Broadcast>

Select whether to prohibit sequential broadcasting, a feature that sends faxes to multiple destinations in succession. Restricting Sequential Broadcasts

<Off>

<On>

<TX Terminal ID>

Specify settings for adding the sender information, including the fax number and the name of the machine, to the fax header. The recipient can check who sent the fax by looking at the added information.

<Off>

<On>

<Fax>

<Tel>

<Menu>

<Send>

Select <On> in <Add TX Terminal ID>

Specify the settings

<Apply>

<Print Position>
Specifies the position to print the terminal ID information in the sent fax. Select <Inside Image Area> to print the information inside the image area, or <Outside Image Area> to print the information outside the image area.

<Mark Number As>
Adds the "FAX" or "TEL" mark in front of the fax number registered for the machine (Registering the Fax Number and Unit Name). Select <Tel> to indicate that the notified number is a telephone number.

<Auto Adjust VoIP Comm. Speed>

When you want to perform a successful fax communication with a partner device or on a line with which errors tend to occur easily, you can use this function to reduce communication errors.

<Off>

<On>

<Menu>

<Send>

Select <Off> or <On>


If you set the function to <On>, the communication speed may be slower.

<Send>

Asterisks (*)

<Common Settings>

<Restrict New Destinations>

<Restrict Resending from Log>

<Confirm When Coded Dial TX>

<Confirm Dest. Before Sending>

<Scan and Send Settings>

<Register Unit Name>

<E-Mail Settings>

<Change Default Settings (E-Mail)>

<I-Fax Settings>

<Change Default Settings (I-Fax)>

<TX Terminal ID>

<File Settings>

<Change Default Settings (File)>

<Fax Settings> *1

<Change Default Settings (Fax)>

<Off-Hook Alarm>

<ECM TX>

<Set Pause Time> *2

<Auto Redial> *2

<Check Dial Tone Before Send> *2

<Set Line>

<Register Unit Tel. Number>

<Register Unit Name>

<Select Line Type> *2

<Rotate Img to Send(Long Edge)>

<TX Start Speed>

<R-Key Setting>

<PBX>

<Archive TX Document> *3

<Confirm Entered Fax Number>

<Allow Fax Driver TX>

<Restrict Sequential Broadcast>

<TX Terminal ID>

<Auto Adjust VoIP Comm. Speed>