Countermeasures for Each Message

If you cannot send a fax or the memory is full, or you encounter operation problems, a message appears on the display. Find out more information about messages in the following list.

A counterfeit or non-Canon cartridge may be in use. The amount in the cartridge cannot be displayed correctly.

A malfunction may occur. A non-Canon toner cartridge or a toner cartridge of the wrong color may be inserted. To use this cartridge, press [I Agree]. Source of Error

An error occurred during certificate verification.

An invalid paper size/type combination was detected. Drawer: XXXX Check the position of the paper guides in the drawer and [Paper Settings] on the Home screen.

XXXX shows paper sources (1 to 4) of the paper drawer.

Black & White copying is restricted. Only Color copying is available.

Black & White printing is restricted. Only Color printing is available.

Cannot analyze the authentication server certificate.

Cannot change the destination type of destinations registered to a group.

Cannot find the access point.

Cannot print RX data.

Cannot receive the fax. Make sure the fax was sent correctly by the sender.

Cannot scan from the feeder when Book->2 Pages is set.

Cannot send because more than one destination is specified.

Cannot specify group destinations, or multiple destinations at the same time.

Cannot specify group destinations when on-hook.

Cannot use these settings. Sending to the specified destination is restricted.

Cartridge Communication Error A counterfeit or non-Canon cartridge may be in use.

Change the authentication password.

Check the authentication settings.

Color copying is restricted. Only Black & White copying is available.

Color printing is restricted. Only Black & White printing is available.

Copying is restricted.

Could not connect.

Could not connect. Check the PSK settings.

Could not connect using the wireless LAN. Turn the main power OFF and ON, then configure the settings again.

Could not connect using WPS. Wait a moment, then configure the settings again.

Could not connect. The maximum number of devices that can connect to the access point has been reached.

Could not detect any connections from wireless devices.

Could not perform cleaning.

Could not perform correction.

Could not perform Open System authentication. Check the WEP settings.

Could not perform Shared Key authentication. Check the WEP settings.

Direct Connection terminated.

Faxing is restricted.

Google Cloud Print Authentication Error

Google Cloud Print Communication Error

Information about the remaining amount of toner cannot be detected properly. A non-Canon toner cartridge or a toner cartridge with the wrong name may be inserted. To use this cartridge, press [I Agree]. Source of Error

Insert the waste toner container.

Load paper.

Load staples into the stapler unit.

Memory Full (Secure Print)

Memory Full (Skip Error)

Memory Media Print is restricted.

No reply from the destination.

No response from the host.

Paper jammed.

Paper Settings and Loaded Size Mismatch

Printing is restricted.

Remote scanning is restricted.

Replace the waste toner container.

Replace toner cartridge.

Scanning is restricted.

Set the correct authentication information.

Set the information necessary for authentication.

Specifying and registering new destinations is restricted.

The authentication server certificate has expired.

The authentication server certificate is incorrect.

The computer is restricted.

The memory is full.

The memory is full. Enter the original type settings again.

The memory is full. Scanning will be canceled. Do you want to print?

The number of entered characters is incorrect or invalid characters are used.

The paper size/type combination is invalid.

The USB memory is restricted.

The WEP key is not set correctly. Check the WEP settings.

Toner low. (Rplct. not yet needed.)

Use Remote UI to set the information necessary for authentication.

6EL7-0C1