<Printer>

This section describes the printer settings.
<Output Report>
 (Settings/Registration)  <Function Settings>  <Printer>
You can print reports for the machine settings.
<Printer Settings>
 (Settings/Registration)  <Function Settings>  <Printer>
Specify the printer settings.
For more information, see Setting the Machine (PS/PCL/UFR II Printer).
<Restrict Printer Jobs>
 (Settings/Registration)  <Function Settings>  <Printer>
If this setting is set to <On>, you can restrict jobs from the printer driver.
<PDL Selection (Plug and Play)>
 (Settings/Registration)  <Function Settings>  <Printer>
Select default Page Description Language (PDL).
<Paper Feed Mode for Printer Driver Jobs with MP Tray>
 (Settings/Registration)  <Function Settings>  <Printer>
You can set whether to prioritize the printer driver settings or the paper settings in the machine when printing a job with the multi-purpose tray specified as the paper source. In addition, if you prioritized the settings in the machine, set the paper feed mode for when free size paper is set in the multi-purpose tray.
<Envelope Flap Length Settings>
 (Settings/Registration)  <Function Settings>  <Printer>
You can set the flap length when Nagagata 3 envelopes are loaded vertically (with the flap on the far side) in the multi-purpose tray.
<PS Password Settings>
 (Settings/Registration)  <Function Settings>  <Printer>
You can specify the password that restricts the use of the control command prepared by the PS printer.
<Paper Feed Mode When Using PCL Emulation>
 (Settings/Registration)  <Function Settings>  <Printer>
You can set the paper source used for the PCL5 PaperSource command.
6RS2-0K7