Basic Copy Operations

This section describes the basic operation procedure used to copy an original.
Place the original(s). Placing Originals
Select <Copy> in the Home screen. Home Screen
Select <Number of Copies> in the Copy Basic Features screen. Copy Basic Features Screen
Enter the number of copies, and select <Close>.
If you have entered an incorrect value, use  to clear it.
Specify the copy settings as necessary.
Adjusting Density
2-Sided Copying
Enlarging or Reducing
Selecting Copy Paper
For information about other copy settings, see Enhancing and Adjusting Copy Quality or Useful Copy Functions.
Select <Start>.
Copying starts.
If you want to cancel, select <Cancel>  <Yes>. Canceling Copies
When placing originals in the feeder in step 1
The original is automatically scanned.
When placing originals on the platen glass in step 1
When the <Paper Settings and Loaded Size Mismatch> or <The memory is full. Scanning will be canceled. Do you want to print?> message is shown in the display, there is a possibility that copying cannot be performed properly. For more information, see "Troubleshooting (FAQ)" on the online manual website.
When copying originals with text or images that extend to the edges of the page
The edges of the original might not be copied. For more information about the scan margins, see Main Unit.
If you always want to make copies with the same settings: Changing the Default Settings for Functions
If you want to register a combination of settings to use when needed: Registering Frequently Used Settings