Front Side
Motion sensor
When the motion sensor detects a person near the machine, the machine exits sleep mode automatically. Entering Sleep Mode
Control panel
The control panel consists of the indicators and touch panel display. You can perform all the operations and specify settings from the control panel.
Feeder
Automatically feeds originals into the machine for scanning. When two or more sheets are loaded in the feeder, originals can be scanned continuously. Feeder
USB port (Front-right side of the machine)
You can connect devices such as a USB memory device to the machine. Connecting a USB Memory Device
The machine can supply a maximum power of 5 V 500 mA. Connecting a device that requires more power may damage the machine.
Some types of memory media may not be able to save data correctly.
The USB port (front-right side of the machine) supports USB 2.0.
Right cover of the main unit
Open this cover when clearing a paper jam inside the machine. Paper Jams in a Paper Source
USB port (Rear-right side of the machine)
You can connect devices such as an external storage disk to the machine. Backing Up/Restoring Data
When you select <Wired LAN + Wired LAN> for <Select Interface>, connect a USB-LAN adapter here. Connecting to a Wired LAN for the Sub Line
The machine can supply a maximum power of 5 V 900 mA. Connecting a device that requires more power may damage the machine.
The USB port (rear-right side of the machine) supports USB 3.0.
USB connector
Connect a USB cable when connecting the machine and a computer.
The USB connector supports USB 2.0.
LAN port
Connect a LAN cable when connecting the machine to a wired LAN router, etc. Setting up the Network Environment
Multi-purpose tray
Load paper into the multi-purpose tray when you want to use a type of paper different from that which is loaded in the paper drawer.
Upper-right cover of the paper drawer
Open this cover when clearing a paper jam inside the machine. Paper Jams in a Paper Source
Lower-right cover of the paper drawer
Open this cover when clearing a paper jam inside the machine. Paper Jams in a Paper Source
Paper drawer 1
Load the type of paper that you frequently use. Paper Drawer
Paper drawer 2
Load the type of paper that you frequently use. You can load paper that cannot be loaded in the paper drawer 1. Paper Drawer
Waste toner container cover
Open this cover when replacing the waste toner container. Replacing the Waste Toner Container
Toner Code
This code indicates the type of genuine toner that can be used with the machine.Use toner with a code that includes the same letters as the code on the front cover of the machine.
Power switch
Press the power switch when turning ON or OFF the machine.
Glass cleaning cloth storage box
Use this box to store the cloth for cleaning the platen glass.
Output tray
Paper is output here when printing finishes. The Collate, Group, and Rotate 90 Degrees functions are supported.
Front cover of the main unit
Open this cover when replacing the toner container or the drum unit, or cleaning the dust-proof glass.
Output tray paper supporter
Raise this supporter so that printed paper does not fall down.
|
For more information about the configuration of optional equipment installed on the machine, see Options. |
Connecting a USB Memory Device
You can connect a USB memory device to the USB ports located on the right side of the machine, and directly print data from the USB memory device. Originals scanned using the machine can also be saved directly to the USB memory device.
 |
Make sure that the USB memory device is oriented properly when connecting it to the machine. If it is not connected properly, it may cause the USB memory device or machine to malfunction. Make sure to follow the proper procedure when removing the USB memory device. Removing the memory media Failure to do so may cause the USB memory device or machine to malfunction. You can use a USB memory device with a FAT32 (up to 32 GB) or exFAT (up to 2 TB) file system. |
|
Unsupported devices and usagesMemory media with security functions Memory media that does not meet the USB specification Memory card readers connected via USB Connecting memory media via an extension cable Connecting memory media via a USB hub |