Loading Paper
You can load the paper into the paper drawer. See Available Paper for available paper sizes and types.
About Paper
How to Load Paper
Configuring the Settings for the Loaded Paper
Precautions for Paper
|
Do not use the following types of paper:A paper jam or printing error may occur. Wrinkled or creased paper Curled or rolled paper Torn paper Damp paper Very thin paper Paper printed by a thermal transfer printer Back side of paper printed by a thermal transfer printer Highly textured paper Glossy paper Notes on use of paperOnly use paper that has fully acclimatized to the environment in which the machine is installed. Using paper that has been stored under different temperature or humidity may cause paper jams or result in poor print quality. Paper handling and storageStore the paper on a flat surface. Keep the paper wrapped in its original package to protect the paper from moisture or dryness. Do not store the paper in such a way that may cause it to curl or fold. Do not store the paper vertically or stack too much paper. Do not store the paper in direct sunlight, or in a place subject to high humidity, dryness, or drastic changes in temperature or humidity. |
 |
When printing on paper that has absorbed moistureSteam may emit from the paper output area, or water droplets may form around the paper output area. There is nothing unusual about any of these occurrences, which occur when the heat generated from fixing toner on the paper causes moisture in the paper to evaporate (most likely to occur at low room temperatures). |
Storing the Paper Printed with the Machine
When handling/storing the paper printed with the machine, take the following precautions.
How to Store the Printed Paper
Store on a flat surface.
Do not store together with articles made of PVC (polyvinyl chloride) such as clear folders. Toner may melt, resulting in the paper's sticking to PVC articles.
Take care that the paper gets folded or creased. Toner may peel off.
To store over a long period of time (two years or longer), store in binders or equivalent.
When the paper is stored over a long period of time, it may become discolored and thus the print may seem to have undergone a change of color.
Do not store in a place where the temperature is high.
Precautions When Applying Adhesive
Always use insoluble adhesive.
Before applying adhesive, perform a test using a printout no longer required.
When putting adhesive-applied paper sheets one over another, make sure that the adhesive is completely dried out.