<Display Settings>

All the settings related to viewing of the display are listed with descriptions. Default settings are marked with a dagger ().
<Default Screen After Startup/Restoration>
<Button Display Order on Home Screen>
<Language>
<Remote UI Language>
<Millimeter/Inch Entry Switch>
<Displ. Timing for Cartridge Prep. Notif.>
<Display Notif. to Clean Fixing Assembly>
<Show Warnings>
<Action When Warning>
<Display IP Address>
Asterisks (*)
Settings marked with "*1" cannot be imported or exported.
Settings marked with "*2" may be unavailable or vary or have different defaults depending on your country or region.

<Default Screen After Startup/Restoration>

By default, the Home screen is displayed immediately after the machine is turned ON or when the Auto Reset function is performed. Specify the setting to change the default screen and display the main screen of a different function.
<Home>
<Secure Print>
<Status Monitor>

<Button Display Order on Home Screen> *1

Configure the settings for the buttons displayed in the Home screen. Customizing the Home Screen

<Language> *2

Select the display language used for the display, reports, and lists.
<Català>
<Čeština>
<Dansk>
<Deutsch>
<Eesti>
<English>
<Español>
<Euskara>
<Français>
<Hrvatski>
<Italiano>
<Latviešu>
<Lietuvių>
<Magyar>
<Nederlands>
<Norsk>
<Polski>
<Português>
<Română>
<Slovenčina>
<Slovenščina>
<Suomi>
<Svenska>
<Türkçe>
<Ελληνικά>
<Български>
<Русский>
<Українська>
<العربية>
<日本語>
<中文(繁體)>
<中文(简体)>
<한국어>

<Remote UI Language> *2

Select the display language used for the Remote UI screens.
<English>
<Japanese>
<French>
<Spanish>
<German>
<Italian>
<Dutch>
<Finnish>
<Portuguese>
<Norwegian>
<Swedish>
<Danish>
<Czech>
<Hungarian>
<Russian>
<Turkish>
<Polish>
<Chinese (Simplified)>
<Chinese (Traditional)>
<Korean>

<Millimeter/Inch Entry Switch>

Select the unit of measurement.
<Millimeter>
<Inch>

<Displ. Timing for Cartridge Prep. Notif.>

Set the display timing for the message notifying you that the amount remaining in the toner cartridges is low.
<Auto>
<Custom>

<Display Notif. to Clean Fixing Assembly>

Select whether to display a message that prompts you to clean the fixing unit. If you set to <On>, you can specify the timing to display a prompt message for cleaning the fixing unit, in terms of the number of printed pages and in units of 1,000.
<Off>
<On>

<Show Warnings>

Specify whether to display a message telling that the amount remaining in the toner cartridges is low.
<Low Cartridge Level>
<Off>
<On>
When <Action When Warning> is set to <Stop Printing>, you cannot set this item to <Off>.
When <Continue Print. When Amount in Cart. Low> is set to <Off>, the message will appear even if you set this item to <Off>. <Continue Print. When Amount in Cart. Low>

<Action When Warning>

Specify whether to continue printing when the amount remaining in the toner cartridges is low.
<Low Cartridge Level>
<Continue Printing>
<Stop Printing>
If you change the setting of this item from <Continue Printing> to <Stop Printing>, <Show Warnings> is set to <On>.

<Display IP Address>

Specify whether to display the machine's IPv4 address on the <Status Monitor> screen. <Status Monitor> Screen
<Off>
<On>
7YX2-058