<Adjust Action>
Specify the settings for adjusting the machine's actions.
|
For information on the items ("A", "B", "C", and "No") in the "Import All Function" column, see Import All Function. Item marked with an asterisk (*)Only appears if you have the option installed. |
<Saddle Stitch Staple Repositioning> *
(Settings/Registration) 
<Adjustment/Maintenance> <Adjust Action>Feeds papers to the saddle stitcher unit and staples them several times, and performs the saddle stitch staple repositioning procedure. The machine performs this adjustment procedure if stapling has not been performed after you clear a staple jam or replace the staple cartridge.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Saddle Stitch Staple Repositioning> | <Start> | Yes | Yes | No | No | B | Settings/Registration Basic Information |
 |
Make sure to remove all output booklets from the booklet tray before performing the saddle stitch staple repositioning procedure. When performing saddle stitch staple repositioning, always use plain paper. |
 |
Paper that is required for the saddle stitch staple repositioning procedure is automatically fed to the saddle stitcher unit by the machine. 305 mm x 457 mm, A3, B4, A4R, 11" x 17", LGL, LTRR, or custom paper sizes equivalent to these paper sizes can be used. (Make the paper source to which transparencies are registered unavailable.) |
<Change Fold/Stitch Position> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>If you notice that the saddle stitch position of the paper is not exactly in the middle of the booklet, you can make adjustments to the saddle stitch position to compensate for this error. Adjust the folding position of the paper and the saddle stitch position at the same time. Adjusting the Saddle Stitch Position
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Change Fold/Stitch Position> | -2.00 mm to 0.00 mm to +2.00 mm (in 0.25 mm increments) | Yes | Yes | No | No | No | - |
<Adjust Saddle Stitch Fold Position> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>If you notice that the folds of the paper are not exactly in the middle of the booklet, you can make adjustments to the fold placement to compensate for this error. This mode enables you to adjust the folding position without changing the stapling position. Adjusting the Saddle Stitch Folding Position
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Adjust Saddle Stitch Fold Position> | -2.00 mm to 0.00 mm to +2.00 mm (in 0.25 mm increments) | Yes | Yes | No | No | No | - |
<Adjust Double Staple Width> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can adjust the double staple width. Double Staple Width Adjustment
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Adjust Double Staple Width> | 120 mm to 150 mm (in 1 mm increments) | Yes | Yes | No | No | No | - |
<Speed/Precision Priority for Double Staple> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can set whether to give priority to the double stapling speed or to precision.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Speed/Precision Priority for Double Staple> | <Speed Priority>, <Precision Priority> | Yes | Yes | No | No | No | - |
|
The <Speed/Precision Priority for Double Staple> function is enabled only when using the following paper: Paper size: The width for the feeding direction is from 182 mm to 215.9 mm Paper type: Thin 1, Plain 1 to 2, Heavy 1, Color 1 to 2, Recycled 1 to 3, Pre-Punched 1 to 2 Paper weight: 64 g/m2 to 128 g/m2 If you select <Speed Priority>, stapled output paper may not be aligned due to the temperature, humidity, or characteristics of the paper type. |
<Adjust Trim Width> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>This function enables you to adjust the trimming width of Saddle Stitch printouts in 0.1 mm increments for each paper size. Adjusting the Trimming Width
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Adjust Trim Width> | 2.0 mm to 28.0 mm (in 0.1 mm increments) | Yes | Yes | No | No | No | - |
<Fine Adjust Perfect Binding Finishing Size> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can make fine adjustments to the trimming width of the Perfect Binder. Perfect Binding Finishing Size Fine Adjustment
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Fine Adjust Perfect Binding Finishing Size> | <Horizontal>: -0.5 mm to 0.0 mm to +0.5 mm (in 0.1 mm increments) <Vertical (Top + Bottom)>: -1.0 mm to 0.0 mm to +1.0 mm (in 0.1 mm increments) | Yes | Yes | No | No | A | Settings/Registration Basic Information |
<Adjust Perfect Binding Glue Application> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>When you make a booklet in the Perfect Binding mode, you must use the correct amount of glue or the bound booklet may be poorly finished. In this case, adjust the amount of glue to improve the finishing condition of the booklet. Adjusting the Amount of Glue for Perfect Binding
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Adjust Perfect Binding Glue Application> | <Non-Coated>: <50 or Less>, <51-100>, <101-150>, <151 or More> <Coated>: <50 or Less>, <51-100>, <101-150>, <151 or More> Setting range: -6 to 0 to +6 | Yes | Yes | No | No | A | Settings/Registration Basic Information |
<Color/B&W Priority for First Print Time>
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can set whether priority is given to color or black-and-white printing for the first print time.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Color/B&W Priority for First Print Time> | <Color Priority>, <Black & White Priority> | No | No | No | No | No | - |
|
Users other than the administrators should not change the settings. For instructions on changing the settings, contact your dealer or service representative. |
 |
The settings are only effective after the first job is processed and you have restarted the machine (by turning the main power switch OFF and then ON again). For instructions on restarting (turning the main power switch OFF and then ON) the machine, see Turning ON the Machine. |
<Adjust Fold Position> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can adjust the paper folding position. <Adjust Fold Position>
<Correct Curl for Each Paper Drawer>
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>This function enables you to adjust the curl correction level of each paper source. Curl Correction for Each Paper Drawer
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Correct Curl for Each Paper Drawer> | Select the paper source <Face Up Output (Reverse)>: -15 to 0 to +15 <Face Down Output (Normal)>: -15 to 0 to +15 <2-Sided Output>: -15 to 0 to +15 | Yes | Yes | No | No | No | - |
<Alignment Adjustment When Stapling> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>The copied or printed paper may shrink because of temperature, humidity, or a characteristic of the paper type. In this case, this function enables you to align copied or printed papers by adjusting the position of the alignment guide inside the finisher so as to staple the aligned papers. Paper Alignment When Stapling
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Alignment Adjustment When Stapling> | -3.0 mm to 0.0 mm to +3.0 mm (in 0.1 mm increments) | Yes | Yes | No | No | A | Settings/Registration Basic Information |
<Finisher Tray A Alignment Adjustment> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can adjust paper alignment when outputting on Tray A of a finisher. Paper Alignment on Finisher Tray A/B
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Finisher Tray A Alignment Adjustment> | -3.0 mm to 0.0 mm to +3.0 mm (in 0.1 mm increments) | Yes | Yes | No | No | A | Settings/Registration Basic Information |
<Finisher Tray B Alignment Adjustment> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can adjust paper alignment when outputting on Tray B of a finisher. Paper Alignment on Finisher Tray A/B
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Finisher Tray B Alignment Adjustment> | -3.0 mm to 0.0 mm to +3.0 mm (in 0.1 mm increments) | Yes | Yes | No | No | A | Settings/Registration Basic Information |
<Finisher Output Priority Settings (Thin)> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>When Thin paper is used, you can give a priority to productivity or alignment for the output paper.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Finisher Output Priority Settings (Thin)> | <Productivity Priority>, <Alignment Priority> | Yes | Yes | No | No | No | - |
|
This function only effective when outputting to tray B of a finisher. |
<Switch Saddle Fold Mode> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can set whether to prioritize productivity or alignment when using Saddle Fold.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Switch Saddle Fold Mode> | <Productivity Priority>, <Alignment Priority> | Yes | Yes | No | No | No | - |
|
<Switch Saddle Fold Mode> is enabled when using the following paper. Paper type: Thin paper, plane paper, heavy paper, coated paper Basis weight: Thin paper: 52 to 63 g/m2, plane paper: 64 to 105 g/m2, heavy paper: 106 to 209 g/m2, coated paper: 106 to 209 g/m2 When <Productivity Priority> is selected, the edges of the saddle fold may not be aligned due to the temperature, humidity, paper characteristics or image density. |
<Start Key Touch Recognition Delay>
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>Adjust the touch time required to begin startup processing.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Start Key Touch Recognition Delay> | -1 to 0 to +7 | No | No | No | No | C | Settings/Registration Basic Information |