پیامی ظاهر می‌شود

An error occurred during certificate verification.

Black & White copying is restricted. Only Color copying is available.

Black & White printing is restricted. Only Color printing is available.

Cannot access the file or folder. Wait a moment and try again, or check the settings from Remote UI.

Cannot analyze the authentication server certificate.

Cannot change the destination type of destinations registered to a group.

Cannot find the access point.

Cannot print. A non-Canon or counterfeit cartridge may be inserted.

Cannot print RX data.

Cannot receive the fax. Make sure the fax was sent correctly by the sender.

Cannot recognize the image.

Cannot send because more than one destination is specified.

Cannot specify group destinations when on-hook.

Cannot specify group destinations, or multiple destinations at the same time.

Cannot use these settings. Sending to the specified destination is restricted.

Cartridge communication error. Cannot print. A non-Canon or counterfeit cartridge may be inserted.

Cartridge Communication Error Problems resulting from the use of non-Canon cartridges are not covered under the warranty.

Change the authentication password.

Check the authentication settings.

Color copying is restricted. Only Black & White copying is available.

Color printing is restricted. Only Black & White printing is available.

Copying is restricted.

Could not connect.

Could not connect. Check the encryption key.

Could not connect. The maximum number of devices that can connect to the access point has been reached.

Could not connect using Easy Connection via PC. The device will restart.

Could not connect using the wireless LAN. Turn the main power OFF and ON, then configure the settings again.

Could not connect using WPS. Wait a moment, then configure the settings again.

Could not detect any connections from wireless devices.

Could not perform cleaning.

Could not perform correction.

Could not perform IEEE 802.1X authentication. Cannot analyze the authentication server certificate.

Could not perform IEEE 802.1X authentication. Change the authentication password.

Could not perform IEEE 802.1X authentication. Check the authentication settings.

Could not perform IEEE 802.1X authentication. Configure the correct authentication information.

Could not perform IEEE 802.1X authentication. Configure the information required for authentication.

Could not perform IEEE 802.1X authentication. No reply from the destination.

Could not perform IEEE 802.1X authentication. The authentication server certificate has expired.

Could not perform IEEE 802.1X authentication. The authentication server certificate is incorrect.

Could not perform Open System authentication. Check the encryption key settings.

Could not perform Shared Key authentication. Check the encryption key settings.

Direct Connection terminated.

Easy Connection via PC ended due to timeout The device will restart.

End of Cartridge Lifetime

Faxing is restricted.

ITB is near end of lifetime. Replcmt. is not yet needed.

Load paper.

Low Cartridge Level

Memory Full (Secure Print)

Memory Full (Skip Error)

Memory Media Print is restricted.

No reply from the destination.

No response from the host.

Paper jammed.

Paper Settings and Loaded Size Mismatch

Prepare cartridge.

Printing is restricted.

Problems resulting from the use of non-Canon cartridges are not covered under the warranty. The amount remaining in the cartridge cannot be displayed correctly.

Remote scanning is restricted.

Scanning is restricted.

Set the correct authentication information.

Set the information necessary for authentication.

Specifying and registering new destinations is restricted.

The authentication server certificate has expired.

The authentication server certificate is incorrect.

The computer is restricted.

The encryption key is not set correctly. Check the encryption key settings.

The fax number has too many digits.

The memory is full. [The memory is full.] در پنل عملیات نمایش داده شده است، و نمی‌توان عملیات را انجام داد.

The memory is full. Enter the original type settings again.

The memory is full. Scanning will be canceled. Do you want to print?

The number of entered characters is incorrect or invalid characters are used.

The USB memory is restricted.

Use Remote UI to set the information necessary for authentication.

9074-0J2