[Adjust Image Quality]

Document number: 84CU-0JL
Use this setting to adjust the image quality or print position and for special processing according to the paper used.
* Values in bold red text are the default settings for each item.
[Auto Adjust Gradation]
[Auto Correction Settings]
[Correct Print Color Mismatch]
[Black Text Processing for Color]
[Adjust Print Position]
[Special Processing]
[Remove Streaks from Scan Area]

[Auto Adjust Gradation]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
Correct the gradations if they are not reproduced correctly during printing or copying. Calibrating the Gradation
[Full Adjust]
[Quick Adjust]
[Adjust Copy Image]

[Auto Correction Settings]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
Specify when to perform Quick Adjust (gradation calibration) and Correct Print Color Mismatch automatically and the operation to be performed during Quick Adjust.
[Auto Correction Settings]

[Correct Print Color Mismatch]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
Correct color mismatching when printed images are blurry or the colors are misaligned. Correcting Color Mismatch

[Black Text Processing for Color]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
When you are scanning originals in color, make adjustments to give priority to reproducing color text that is close to black or making black text easier to see. Adjusting the Reproducibility of Near Black Color Text
[Feeder]
7 levels
 
[Platen Glass]
7 levels

[Adjust Print Position]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
Adjust the print position if text or images are printed off-center or outside the printable range. Adjusting the Print Position
[Multi-Purpose Tray]
[Adjust Vertically (Front Side)]
-0.20" to 0.00" to + 0.20" (-5.0 to 0.0 to + 5.0 (mm))
[Adjust Horizontally (Front Side)]
-0.20" to 0.00" to + 0.20" (-5.0 to 0.0 to + 5.0 (mm))
[Adjust Vertically (Back Side)]
-0.20" to 0.00" to + 0.20" (-5.0 to 0.0 to + 5.0 (mm))
[Adjust Horizontally (Back Side)]
-0.20" to 0.00" to + 0.20" (-5.0 to 0.0 to + 5.0 (mm))
 
[Drawer 1]
[Adjust Vertically (Front Side)]
-0.20" to 0.00" to + 0.20" (-5.0 to 0.0 to + 5.0 (mm))
[Adjust Horizontally (Front Side)]
-0.20" to 0.00" to + 0.20" (-5.0 to 0.0 to + 5.0 (mm))
[Adjust Vertically (Back Side)]
-0.20" to 0.00" to + 0.20" (-5.0 to 0.0 to + 5.0 (mm))
[Adjust Horizontally (Back Side)]
-0.20" to 0.00" to + 0.20" (-5.0 to 0.0 to + 5.0 (mm))
 
[Drawer 2]*1
[Adjust Vertically (Front Side)]
-0.20" to 0.00" to + 0.20" (-5.0 to 0.0 to + 5.0 (mm))
[Adjust Horizontally (Front Side)]
-0.20" to 0.00" to + 0.20" (-5.0 to 0.0 to + 5.0 (mm))
[Adjust Vertically (Back Side)]
-0.20" to 0.00" to + 0.20" (-5.0 to 0.0 to + 5.0 (mm))
[Adjust Horizontally (Back Side)]
-0.20" to 0.00" to + 0.20" (-5.0 to 0.0 to + 5.0 (mm))
*1 May not be displayed depending on the model, the installed options, and other settings.

[Special Processing]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
Use a range of processes to resolve problems that arise due to factors such as the paper type, the material used, or its condition.
[Special Processing]

[Remove Streaks from Scan Area]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
Specify whether stained areas are omitted from scanning when streaks are detected during feeder use.
* Note that if soiled areas are not scanned, images and text in soiled areas will also not be scanned. If streak-shaped unscanned areas appear when scanning originals with this set to [On], clean the feeder. Cleaning the Feeder
[Off]
[On]

Find manuals for other products
imageCLASS MF753Cdw / MF751Cdw
User's Guide (Product Manual)
USRMA-7178-022023-06Copyright CANON INC. 2023