Options
The functionality of the machine can be expanded by installing options to the machine.
Available Options
Finding Options According to Your Purposes
To load a large amount of paper into paper decks
To use functions such as folding and stapling, or install an output tray
For the optional equipment enabling you to use functions such as collating and stapling, see Optional Equipment Supporting Specific Functions.
To load long sheet paper
To stack a large amount of paper
To adjust the image position, colors, and other settings automatically
To check the status of the machine from a distance
Handling of the Options
 |
Do not place your hand in the part of the tray where stapling is performed (near the rollers) if a finisher is attached, as this may result in personal injury.  Do not place your fingers or hands on the finisher when the finisher is in use. Doing so may result in personal injury or damage to the finisher. When removing paper from the tray of the finisher, do not place your hands on the output tray of the finisher. The tray may move upward and your hands may get caught.  |
 |
The trays of the finisher move during printing. Do not place anything under the trays, as doing so may damage the trays. Do not place anything other than output paper in the trays of the finisher, as doing so may damage the trays. |
 |
Some of the settings may not be displayed depending on the configuration of optional equipment installed on the machine. |