Registering Non-standard Size Paper (Custom Paper)

Custom paper is non-standard size paper whose side lengths can be freely defined within the range supported by the machine.
It is recommended to register a frequently used non-standard paper size. You can call the registered paper size on the paper size selection screen, which saves time to entering the paper size. You can register up to three custom sizes.
This section describes how to register the settings using the control panel.
You can also register the settings using Remote UI from a computer. Managing the Machine from a Computer (Remote UI)
Touch Panel Model
5 Lines LCD Model

Touch Panel Model

1
On the control panel, press [Paper Set.] in the [Home] screen. [Home] Screen
2
Press [Register Custom Paper].
The [Register Custom Paper] screen is displayed.
3
Select the registration number.
The size is registered to the selected number.
If you have selected the registered number, continue on to press [Edit].
4
Press [X] or [Y] to enter the length and press [Apply].
5
Press [Apply].
6
Select the paper type to register.
The custom paper is registered.

5 Lines LCD Model

1
Press  (Paper Setting key) on the control panel. Control Panel
[Paper Settings] screen is displayed.
2
Select [Register Custom Paper], and press .
The [Register Custom Paper] screen is displayed.
3
Select the registration number, and press .
If you have selected the registered number, continue on to select [Edit], and press .
4
Select [X]    enter the values in [X]  .
5
Enter the values in [Y] in the same way as [X].
6
Select [<Apply>], and press .
7
Select the type of the paper, and press .
The custom paper is registered.
8W0J-035