Changing the Report and List Print Settings
Reports and lists are printed on paper on one side by default. You can change the setting to print on both sides. You can also change the setting to automatically print communication results reports.*1
*1 For the 5 Lines LCD Model, the reports of communication results are not available.
Use the control panel to configure the settings. You cannot configure the settings using Remote UI from a computer.
Touch Panel Model
1
On the control panel, press [Menu] in the [Home] screen. [Home] Screen
2
Press [Output Rprt.] 
[Report Settings].
[Report Settings].The [Report Settings] screen is displayed.
3
Change the report and list print settings.
To Print Reports and Lists on Both Sides 
1 | Press [Default Settings for Report Output] [2-Sided Printing].The [2-Sided Printing] screen is displayed. |
2 | Press [On]. |
To Change the Communication Management Report Settings
1 | Press [Communication Management Report]. The [Comm. Mngt. Report] screen is displayed. |
2 | Configure the report settings. To print automatically after every 40 communication events, press [Auto Print (40 Transmissions)] [On].To configure the settings to print sending and saving results and receiving results in a different format, press [Separate TX/RX] [On]. |
To Change the Fax TX Result Report Settings
1 | Press [Fax TX Result Report]. The [Fax TX Result Report] screen is displayed. |
2 | Select whether to print this report automatically. To print automatically after each send job, select [On]. To print automatically only when an error occurs, select [Only When Error Occurs]. When [On] or [Only When Error Occurs] is selected, in [Include TX Image], select whether to print part of the original on the report. |
To Change the E-mail or File Sending Result Report Settings
1 | Press [E-Mail/File TX Result Report]. The [E-Mail/File TX Report] screen is displayed. |
2 | Select whether to print this report automatically. To print automatically after each send or save job, select [On]. To print automatically only when an error occurs, select [Only When Error Occurs]. |
To Change the RX Result Report Settings
1 | Press [RX Result Report]. The [RX Result Report] screen is displayed. |
2 | Select whether to print this report automatically. To print automatically after each receive job, select [On]. To print automatically only when an error occurs, select [Only When Error Occurs]. |
5 Lines LCD Model
1
Press 
on the control panel. Control Panel
on the control panel. Control Panel2
Press [Only When Error Occurs] 
[Report Settings] .
[Report Settings] .The [Report Settings] screen is displayed.
3
Select [Default Settings for Report Output] and press .
.The [Default Settings for Report Output] screen is displayed.
4
Press [2-Sided Printing] [On] .
[On] .