Configuring the Default Settings (Setup Guide) (5 Lines LCD Model)
When you turn ON the machine for the first time, the screen (Setup Guide) for setting the items required for using the machine is displayed. Configure the settings using the procedure below by following the instructions on the screen.
Step 1: Setting the Display Language and Country or Region
Set the language displayed on the operation panel screen and reports to be printed. Next, set the country or region where the machine is used.
1
On the [Language] screen, select the display lamguage and press
.
2
Select [Yes], and then press
.
The display language is set, and the [Select Country/Region] screen is displayed.
Depending on the country or region, the [Select Country/Region] screen is not displayed and the [Time Zone] screen is displayed. When the [Time Zone] screen is displayed, proceed to "Step 2: Setting the Date and Time."
Step 2: Setting the Date and Time3
On the [Select Country/Region] screen, select the country or region, and press
.
The country or region is set, and the [Time Zone] screen is displayed.
Step 2: Setting the Date and Time
The date and time are used as the reference for the functions using date and time information, and therefore, they need to be set accurately.
1
On the [Time Zone] screen, select your time zone and press
.
Set the time zone (UTC*1) and Daylight Saving Time according to the region where this machine is installed.
*1 The UTC (Coordinated Universal Time) is a coordinated universal time that is standard for all parts of the world. Internet-based communication relies on the UTC being set correctly.
2
On the [Current Time Set.] screen, enter the date and time, and press
.
The time and date are set, and the Remote UI confirmation screen is displayed.
Step 3: Setting Remote UI
With Remote UI, you can use a Web browser on a computer to check the operation status of the machine, change the settings, and perform other operations.
Set the System Manager ID and Remote UI Access PIN to prevent unauthorized access to the machine.
1
On the Remote UI confirmation screen, select [<Yes>] and press
.
To set the Remote UI Access PIN at a later time, select [<No>] and proceed to "Step 4: Connecting to a Wireless LAN."
Step 4: Connecting to a Wireless LAN2
Confirm the message
press
confirm the message
select [Yes]
press
.
The [Remote UI Access PIN] screen is displayed.
Restrict the use of Remote UI to only those users who know the Remote UI Access PIN.
3
Enter the Remote UI Access PIN
select [<Apply>]
press
.
Specify any number. You cannot set a PIN consisting of all zeros, such as "00" or "0000000."
4
Enter the PIN again
select [<Apply>]
press
.
After the message [Settings applied.] appears, the screen for confirming the wireless LAN connection is displayed.
Step 4: Connecting to a Wireless LAN
Connect to the network using wireless local area network (LAN).
1
On the screen for confirming the wireless LAN connection, select [Yes] and press
.
2
Select the Wireless LAN connection type, and connect to the Wireless LAN.
When the connection to the wireless LAN is completed, the Toner Replenishment Service confirmation screen is displayed.
Depending on your wireless LAN router, the connection type and security standards may vary. Check for a connection type and security standard that are supported by both the wireless LAN router and the machine, and then establish a connection according to the connection type. For the standards and procedure, see the following:
Connecting to a Wireless LANStep 5: Configuring Settings for Toner Replenishment Service
You can configure settings for toner replenishment service. Through toner replenishment service, new toner cartridges are automatically delivered to you before your existing toner cartridges are used up.
* Use of the toner replenishment service requires prior registration with select retailers. This service is only available in certain countries.
* This service can be set up through [Toner Delivery Set.] displayed on the [Home] screen.
[Home] Screen1
On the confirm screen of toner replenishment service, press
.
2
Press
.
3
Press
.
The settings configured in the Setup Guide are applied.
When you exit the Setup Guide, the [Home] screen is displayed.
[Home] ScreenIf connecting to the server fails, try configuring the settings again through [Connect to Server/Verify Connection] in [Toner Delivery Set.].
[Home] Screen