[Special Processing]
Use a range of processes to resolve problems that arise due to factors such as the paper type, the material used, or its condition.
* Values in bold red text are the default settings for each item.
* Values in bold red text are the default settings for each item.
[Special Paper Processing]
[Menu] 
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]Specify special processing for the paper in the following situations: If you are using special paper To print on the back of printed paper For paper with a rough surface If the envelope flap is stuck down If the paper curls during printing |
[Manual Back Side Print (2-Sided Only)]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing] [Special Paper Processing]
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing] [Special Paper Processing]If you are using paper that has already been printed on, toner smudges and splatters may appear on the back side. If so, specifying [On] for that paper source may improve the print results.
* When this is set to [On], if some time has passed since the front side of the paper was printed, or depending on the operating environment humidity, changes in image quality or paper jams may occur.
[Multi-Purpose Tray] [Off] [On] [Drawer 1] [Off] [On] [Drawer 2]*1 [Off] [On] |
*1 May not be displayed depending on the model, the installed options, and other settings. |
[Transfer Adjustment Mode]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]The print quality may be deteriorated or there may be uneven densities.
If the print is output but the toner is not fully fixed, select [Mode 4] and [Mode 5] in that order.
When you want to print on damp paper, select [Mode 2] and [Mode 3] in that order.
[Mode 1] [Mode 2] [Mode 3] [Mode 4] [Mode 5] |
[Reduce Humid Paper Curling]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]When you print on damp paper, a paper jam may occur or output paper may be curled. Specifying this setting may improve the situation.
* Specifying [Mode 3] may reduce the print speed.
[Off] [Mode 1] [Mode 2] [Mode 3] |
[Image Blurring Prevention Mode]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]Uneven images may appear on the printed paper. In this case, specifying [Mode 1] may improve the print result. If this does not correct the problem, select [Mode 2] and [Mode 3] in that order.
[Off] [Mode 1] [Mode 2] [Mode 3] |
[Priority for Hot Pressure Roller for Fix]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]When you print on large size paper after printing on small size paper, it may take a long time to start printing on the large size paper.
To prioritize the print speed, specify [Productivity Priority 1] and [Productivity Priority 2] in that order.
To prioritize the print quality, specify [Image Quality Priority].
[Productivity Priority 1] [Productivity Priority 2] [Image Quality Priority] |
[Corr. Paper Conveyance (Thin/Humid Ppr.)]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]Paper jams may occur frequently when printing on thin paper or damp paper. Specifying this setting to [On] may reduce paper jams.
[Off] [On] |