[Adjust Image Quality]

Use this setting to adjust the image quality and for special processing according to the paper used.
* Values in bold red text are the default settings for each item.

[Printer Density]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
When the print results are too dark or too light, you can adjust the density.
9 Levels

[Toner Save]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
You can specify whether to save toner when printing a repot or list of copies.
* If you select [On], the print result may be faded or blurred.
[Off]
[Save Mode (Low Saving)]
[Save Mode (High Saving)]

[Black Text Processing for Color]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
When you are scanning originals in color, make adjustments to give priority to reproducing color text that is close to black or making black text easier to see. Adjusting the Reproducibility of Near Black Color Text
[Feeder]*1
7 levels
 
[Platen Glass]
7 levels
*1 May not be displayed depending on the model, the installed options, and other settings.

[Spd/Img Qlty Priority for Rotate+Collate]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
Specify the print operation when rotating the output.
[Speed Priority]
[Image Quality Priority]

[Special Processing]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
Use a range of processes to resolve problems that arise due to factors such as the paper type, the material used, or its condition.
[Special Processing]

[Remove Streaks from Orig. Scanning Area]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
Specify whether stained areas are omitted from scanning when streaks are detected during feeder use.
* [Remove Streaks from Orig. Scanning Area] may not be displayed depending on the model, the installed options, and other settings.
* Note that if soiled areas are not scanned, images and text in soiled areas will also not be scanned. If streak-shaped unscanned areas appear when scanning originals with this set to [On], clean the feeder. Cleaning the Feeder
[Off]
[On]
958J-09U