For information on the items ("A", "B", "C", and "No") in the "Import All Function" column, see Import All Function. |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Import All Function | Name of Item When Exporting with the Remote UI |
<Adjust Time> | 00:00 to 23:59, in one minute increments | Yes | Yes | No | No | - |
Even if you change the time from 23:59 to 00:00, the date will not be changed. |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Import All Function | Name of Item When Exporting with the Remote UI |
<Date/Time Settings> | Date and Time Setting (12 digit number) | No | No | Yes | No | - |
<Time Zone>: UTC-12:00 to UTC+10:00*1 to UTC+14:00 | No | No | Yes | C | Settings/Registration Basic Information | |
<Daylight Saving Time>: <On>, <Off> | No | No | Yes | C | Settings/Registration Basic Information | |
<Start Date> (<Month>/<Day>/<Time> (0 to 23)), <End Date> (<Month>/<Day>/<Time> (0 to 23)) | No | No | Yes | C | Settings/Registration Basic Information |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Import All Function | Name of Item When Exporting with the Remote UI |
<Time Format> | <24 Hour>, <12 Hour> | No | No | Yes | C | Settings/Registration Basic Information |
You can also specify to automatically synchronize the date and time with a server on the network using SNTP. Making SNTP Settings |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Import All Function | Name of Item When Exporting with the Remote UI |
<Quick Startup Settings for Main Power> | <On>, <Off> | No | No | Yes | C | Settings/Registration Basic Information |
When this function is enabled Standby power is consumed even when the power is turned OFF. A tone sounds when the machine is turned ON, or when the machine is turned OFF if you set <Sleep Mode Tone> in <Other Volume Settings> to <On>. (However, the machine may not be able to start up quickly and the tone may not sound, depending on the status of the machine.) Even if this function is set to <On>, the machine does not startup quickly in the following situations: When any of the network settings below are set to <On> Wi-Fi When turning ON the main power of the machine after turning OFF the main power in any of the conditions below More than 110 hours have elapsed after quick startup Operating jobs Jobs are reserved Just after using telephone lines Backing up data Accessing to the machine via network After specifying settings which require restarting the machine Error is occurred Using the Limited Functions mode The power cord is disconnected after turning OFF the main power MEAP applications which do not support quick startup are installed on the machine When turning ON the main power of the machine in 20 seconds after turning OFF the main power When turning ON the main power of the machine after eight hours have passed since the machine was turned OFF When turning ON the main power of the machine after turning OFF the main power from the Remote UI |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Import All Function | Name of Item When Exporting with the Remote UI |
<Auto Reset Time> | 0 min=Off, 10 to 50 seconds in 10 second increments, 1 to 2 to 9 minutes in one minute increments | Yes | Yes | Yes | C | Settings/Registration Basic Information |
If the login service is being used, the machine automatically logs out the user when the Auto Reset Time elapses. The screen displayed after the Auto Reset initiates differs depending on the following settings. Setting 1: The settings in [Visual Message Settings] (when [Display Timing and Content] is set to [After Logout/Auto Reset]) When Visual Message is not set or after the displayed Visual Message screen is closed, the screen that is specified in Setting 2 is displayed. Setting 2: The settings in <Function After Auto Reset> When <Default Function> is set, the screen specified in <Default Screen After Startup/Restoration> (Setting 3) is displayed. When <Selected Function> is set, the function before the Auto Reset initiates is displayed. (The specified settings and entered values for each function will be cleared.) However, the <Selected Function> settings may not be correctly reflected, and the screen specified in <Default Screen After Startup/Restoration> may be displayed. Setting 3: The settings in <Default Screen After Startup/Restoration> |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Import All Function | Name of Item When Exporting with the Remote UI |
<Restrict Auto Reset Time> | <On>, <Off> | No | No | Yes | C | Settings/Registration Basic Information |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Import All Function | Name of Item When Exporting with the Remote UI |
<Function After Auto Reset> | <Default Function>, <Selected Function> | Yes | Yes | Yes | C | Settings/Registration Basic Information |
If Visual Message is set to be displayed after the Auto Reset mode initiates, the Visual Message screen is displayed first, regardless of this setting. Configuring the Visual Message Function |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Import All Function | Name of Item When Exporting with the Remote UI |
<Auto Shutdown Time> | 0 hr=Off, 1 to 8 hours in one hour increments | No | No | Yes | C | Settings/Registration Basic Information |
This function is not displayed if the fax board is installed. If it is displayed, set <Auto Shutdown Time> to <0>, and contact your dealer or service representative. Even when operating the machine from the Remote UI, the machine automatically shuts down if the touch panel display of the machine is idle for a certain period of time. A malfunction may occur particularly if the machine automatically shuts down while importing. Set <Auto Shutdown Time> to <0> when importing data. |
The Auto Shutdown may not be performed, depending on the usage conditions of the machine. |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Import All Function | Name of Item When Exporting with the Remote UI |
<Auto Shutdown Weekly Timer> | <Sunday> to <Saturday>, 00:00 to 23:59, in one minute increments | No | No | Yes | C | Settings/Registration Basic Information |
If both <Auto Shutdown Time> and <Auto Shutdown Weekly Timer> are set, priority is given to <Auto Shutdown Time>. |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Import All Function | Name of Item When Exporting with the Remote UI |
<Auto Sleep Time> | 10 secs, 1 min, 2 mins, 10 mins, 15 mins, 20 mins, 30 mins, 40 mins, 50 mins, 1 hr, 90 mins, 2 hrs | Yes | Yes | Yes | C | Settings/Registration Basic Information |
It is recommended that the default value is used for this setting. |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Import All Function | Name of Item When Exporting with the Remote UI |
<Sleep Mode Energy Use> | <Low>, <High> | Yes | Yes | Yes | C | Settings/Registration Basic Information |
If the machine is connected to a computer using a USB cable, depending on the timing for entering the sleep mode, the machine may be unable to receive data correctly. Reactivate the machine from the sleep mode, then execute the job again. The energy consumption level may be the same as when <High> is set even when <Low> is set, depending on the status of the machine. |
If the energy consumption level is set to <Low>, communication failure may occur, depending on the network utility software you are using. To avoid this, press the Energy Saver key to cancel the Sleep mode before using the machine. |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Import All Function | Name of Item When Exporting with the Remote UI |
<Auto Sleep Weekly Timer> | <Sunday> to <Saturday>, 00:00 to 23:59, in one minute increments | Yes | Yes | Yes | C | Settings/Registration Basic Information |
If you set both the <Auto Sleep Time> and <Auto Sleep Weekly Timer>, the <Auto Sleep Time> setting is given priority. |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Import All Function | Name of Item When Exporting with the Remote UI |
<Time Settings for Auto Adjust Gradation> | <Sunday> to <Saturday>, 00:00 to 23:59, in one minute increments | Yes | Yes | No | C | Settings/Registration Basic Information |
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Import All Function | Name of Item When Exporting with the Remote UI |
<Sleep Mode Exit Time Settings> | 00:00 to 23:59, in one minute increments | Yes | Yes | Yes | C | Settings/Registration Basic Information |