Adjusting the Volume (for Models with the Fax Function)
You can adjust the volume of sound emitted by the machine. You can also set the machine so that no sound is emitted.
* The volume and sound settings are applied only to the standard line (Line 1). The settings are not applied to additional lines.
Adjusting the Volume for Sending and Receiving Faxes
You can adjust the volume of the incoming fax sound and the sounds notifying you of the sending and receiving results.
This section describes how to adjust the volume using the control panel.
You can also adjust the volume using Remote UI from a computer. Managing the Machine from a Computer (Remote UI)
You can also adjust the volume using Remote UI from a computer. Managing the Machine from a Computer (Remote UI)
1
On the [Home] screen of the control panel, press [Volume Settings]. [Home] Screen
The [Fax Volume Settings] screen appears.
2
Adjust the volume.
[Alarm Volume]
Press [
] or [
] to adjust the volume of the following sounds:
] or [] to adjust the volume of the following sounds:Sound notifying you that fax sending, fax receiving, or printing of received faxes is completed normally
Sound notifying you that fax sending, fax receiving, or printing of received faxes is canceled or ends due to an error
* The volume increases when you move the slider to the right. The sound is muted if you move the slider to the far left.
[Monitor Volume]
Press [] or [] to adjust the volume of the sound emitted when sending a fax.
] or [] to adjust the volume of the sound emitted when sending a fax.* The volume increases when you move the slider to the right. The sound is muted if you move the slider to the far left.
[Memory RX/TX End Tone]
Specify whether the machine emits a sound when Fax Memory Lock sending and receiving is completed normally.
[Memory RX/TX Error Tone]
Specify whether the machine emits a sound when an error occurs with Fax Memory Lock sending and receiving.
3
Press [OK].
The volume settings are applied.
Adjusting the Volume of Notification Sounds for Operations and Statuses
You can adjust the volume of sounds that notify you of operations and statuses, such as when you use the control panel or when errors are detected.
This section describes how to adjust the volume using the control panel.
You can also adjust the volume using Remote UI from a computer. Managing the Machine from a Computer (Remote UI)
You can also adjust the volume using Remote UI from a computer. Managing the Machine from a Computer (Remote UI)
1
On the [Home] screen of the control panel, press [Volume Settings]. [Home] Screen
The [Fax Volume Settings] screen appears.
2
Press [Other Volume Settings].
The [Other Volume Settings] screen appears.
3
Adjust the volume. [Volume Settings] and [Other Volume Settings] Screens
Press [] or [] to adjust the volume.
] or [] to adjust the volume.The volume increases when you move the slider to the right.
The sound is muted if you move the slider to the far left.
4
Press [Close] 
[OK].
[OK].The volume settings are applied.