[Adjust Action]

Adjust the actions of the optional finisher and the machine's finishing functions.

* Values in red text indicate the default setting for each item.

Reposition the staples of the saddle stitch unit so that stapling can be performed. Remove any paper output to the booklet tray before performing this operation.
Perform this operation if stapling is not performed after you remove jammed staples or replace the staple case. When you perform this operation, the machine feeds paper to the saddle stitch unit and staples it several times.

* This item is displayed only on machines with the option installed.

Adjust the saddle stitch fold position and staple position so that they are at the center of the paper. Print a test page, check the current state of the fold position and the shift width on the test page, and then perform adjustment. Adjusting the Saddle Stitch Fold Position and Staple Position

* This item is displayed only on machines with the option installed.

Set whether to give priority to the speed or precision of the puncher.

* This item is displayed only on machines with the option installed.

Adjust the fold position for each paper size. Adjusting the Paper Fold Position

* This item is displayed only on machines with the option installed.

Set the amount of time until the machine automatically staples the paper bundle after it is inserted, when using manual stapling.

* This item is displayed only on machines with the option installed.

Adjust the amount of time to touch [ Start] on the control panel. When you touch the button for the set amount of time, the machine recognizes that the button is pressed, and the processing starts.