[Direct Connection Settings]

Configure the settings for using a direct connection and for the connection function.

* Values in red text indicate the default setting for each item.

Set whether to use a direct connection. Enabling the Direct Connection Function

Select the type of direct connection. Enabling the Direct Connection Function

Set the name used to identify the machine when [Wi-Fi Direct] is selected in [Direct Connection Type].

* "-XY_Canon10" (where "XY" represents two random letters) is automatically appended to the device name for Wi-Fi Direct. However, if you set a device name that is 22 characters or more, "-XY_Canon10" is not appended.

Enter the amount of time from when the direct connection is started until it is terminated. If multiple mobile devices are connected, they will be disconnected when this amount of time elapses after the last connection was started.

Set whether to allow mobile devices to always connect to the machine.
When you select [On], a fixed SSID (network name) and network key (password) need to be set in [Specify SSID to Use] and [Specify Network Key to Use] in [Access Point Mode Settings]. A maximum of five mobile devices can be connected to the machine at the same time.

Set the IP address for the direct connection.

Set the frequency for the direct connection.

Set the SSID (network name) and network key (password) of the direct connection for each login user.
When you set [Automatically Enable/Disable Direct Connection at Login/Logout] to [On], a direct connection can be established automatically at login without pressing [Enable] for [Direct Connection] in [Mobile Portal].

* You cannot configure this setting if you log in as a user with Administrator privileges and select [Device Settings] on the screen displayed after pressing [ Settings/Registration]. To set your own login user SSID and network key, select [Personal Settings].

Set whether to display the login name as the user name for print data that is sent using a direct connection.