Connecting to a Wireless LAN by Using the Router Button (Push Button Mode)
If your wireless LAN router supports WPS push button mode, you can easily set up a connection simply by using the control panel of the machine and the button on the wireless LAN router.
A wireless LAN connection requires Administrator or NetworkAdmin privileges.
1
Log in to the machine as an administrator. Logging In to the Machine
2
On the control panel, press [
Settings/Registration] in the [Home] screen or other screen. [Home] Screen
Settings/Registration] in the [Home] screen or other screen. [Home] ScreenThe [Settings/Registration] screen is displayed.
3
Press [Preferences] 
[Network] [Wireless LAN] [Wireless LAN Settings].
[Network] [Wireless LAN] [Wireless LAN Settings].The [Wireless LAN Settings] screen is displayed.
Press [WPS Push Button Mode].
The machine starts searching for an access point.
5
Press the button on the wireless LAN router within two minutes of starting searching for an access point.
Depending on the wireless LAN router, you may have to press and hold the button.
For details on how to operate the button, see the manual of your wireless LAN router.
6
When [Connected.] appears on the screen of the machine, press [OK].
7
Set the IP address.
NOTE
If an Error Message Appears during Operation and a Connection Cannot Be Established
Press [OK], and repeat the procedure starting from Step 4.