Replacement Parts

This section describes the replacement parts (consumables/consumable parts) used by the machine. Follow the precautions when handling and storing the replacement parts.

For optimum print quality, using Canon genuine Toner, Cartridge and Parts is recommended.

Consumables

Consumable Parts


Depending on the installation environment, printing paper size, or document type, you may need to replace consumables before the end of the estimated lifetime. To maintain print quality, the machine performs automatic calibration in accordance with changes in the environmental conditions. The machine may also perform automatic calibration when it is turned ON or recovers from sleep mode. Calibration uses the toner, and accordingly it may result in a decrease of lifetime of the toner cartridges. The color toner cartridges are used even in black and white printing. Therefore, much use of black and white printing may also result in decrease in the remaining number of printable pages for each color. You can check the current amount of replacement parts remaining. Checking the Remaining Amount of Consumables

Depending on the installation environment, printing paper size, or document type, you may need to replace consumables before the end of the estimated lifetime.

To maintain print quality, the machine performs automatic calibration in accordance with changes in the environmental conditions. The machine may also perform automatic calibration when it is turned ON or recovers from sleep mode. Calibration uses the toner, and accordingly it may result in a decrease of lifetime of the toner cartridges.

The color toner cartridges are used even in black and white printing. Therefore, much use of black and white printing may also result in decrease in the remaining number of printable pages for each color.

You can check the current amount of replacement parts remaining.

Checking the Remaining Amount of Consumables

Consumables

Toner Cartridges for Replacement

Model name	Genuine Canon toner
C1936P	Canon Toner T16 Black Canon Toner T16 Yellow Canon Toner T16 Magenta Canon Toner T16 Cyan


Store toner cartridges as described below Storing toner cartridges in an improper location or environment may cause problems such as data loss. Store unopened until immediately prior to use. Store toner cartridges in the following conditions: Storage temperature range: 0-35°C Storage humidity range: 35% to 85% RH (relative humidity, condensation-free)* *Even within the approved storage humidity range, water droplets (condensation) may develop inside the toner cartridge if the temperatures inside and outside the toner cartridge differ. Condensation will adversely affect the print quality. Do not store toner cartridges in the following locations: Locations exposed to open flames Locations exposed to direct sunlight or bright light for five minutes or more Locations exposed to excessively salty air Locations heavily exposed to corrosive gases (e.g. aerosol sprays or ammonia) Very hot and/or humid locations Locations subject to dramatic changes in temperature and humidity likely to cause condensation Very dusty locations Locations within the reach of children Locations close to products affected by magnetism (e.g. floppy disks or disk drives) Do not store toner cartridges upright or upside down. Store the packaging material safely for future use. It will be needed for situations such as storing the machine with the toner cartridges removed. Canon reserves the right to reposition, reshape, add or remove packaging material without notice.

Store toner cartridges as described below

Storing toner cartridges in an improper location or environment may cause problems such as data loss.

Store unopened until immediately prior to use.

Store toner cartridges in the following conditions:

Storage temperature range: 0-35°C

Storage humidity range: 35% to 85% RH (relative humidity, condensation-free)*

*Even within the approved storage humidity range, water droplets (condensation) may develop inside the toner cartridge if the temperatures inside and outside the toner cartridge differ. Condensation will adversely affect the print quality.

Do not store toner cartridges in the following locations:

Locations exposed to open flames

Locations exposed to direct sunlight or bright light for five minutes or more

Locations exposed to excessively salty air

Locations heavily exposed to corrosive gases (e.g. aerosol sprays or ammonia)

Very hot and/or humid locations

Locations subject to dramatic changes in temperature and humidity likely to cause condensation

Very dusty locations

Locations within the reach of children

Locations close to products affected by magnetism (e.g. floppy disks or disk drives)

Do not store toner cartridges upright or upside down.

Store the packaging material safely for future use. It will be needed for situations such as storing the machine with the toner cartridges removed.

Canon reserves the right to reposition, reshape, add or remove packaging material without notice.


Be careful of counterfeit toners Please be aware that there are counterfeit Canon toners in the marketplace. Use of counterfeit toner may result in poor print quality or machine performance. Canon is not responsible for any malfunction, accident or damage caused by the use of counterfeit toner. For more information, see global.canon/ctc.


For information on the collection of used toner cartridges, see the Notice.

Consumable Parts

ITB Unit and the Secondary Transfer Outer Roller

Make sure to use the dedicated ITB unit and the secondary transfer outer roller for this machine.

TB-506/TR-504

The average number of pages that can be printed with the ITB unit and secondary transfer outer roller is 150,000 sheets (paper size assumed to be A4 or Letter).


When replacing the ITB unit and the secondary transfer outer roller, see Replacing the ITB Unit and the Secondary Transfer Outer Roller.

Fixing Assembly

FX-509

The average number of pages that can be printed with the fixing assembly is 150,000 sheets (paper size assumed to be A4 or Letter).


When replacing the fixing assembly, see Replacing the Fixing Assembly.