Configuring the Built-in Task
This section describes the procedure for configuring built-in tasks.
1.
Select the [Tasks] menu > [Built-In Tasks].
2.
Select the built-in task to check in the list on the [Built-In Tasks] page.
For details on the tasks, see the following.
3.
Configure the task execution schedule on the [Built-In Task Details] page.
In [Active/Inactive], set the state of the task.
[Active] | The task is automatically executed at the specified schedule. |
[Inactive] | The task is not executed. Select this to defer or stop a task. |
In [Task Execution], set the task execution schedule.
[Task Execution] | Specifies the interval for executing the task. Select [day] or [week] from the drop-down list as the interval, and specify the interval using a numeric value. For example, when "1" is specified as the interval, the task is executed every day or week. When "2" is specified as the interval, the task is executed every second day or second week. If you selected [week], select the day of the week to execute the task in [Execute On]. In [Start Time], specify the time to execute the task. To specify a periodic execution period, select [Specify the start of the task execution period] or [Specify the end of the task execution period], and specify the day/time. |
For information on the other settings of a [Discover Devices] task, see the following.
For information on the other settings of a [Device Registration] task, see the following.
4.
Click [Apply].
To execute immediately, click [Execute Now].
You can check the status of executing tasks by selecting the [Tasks] menu > [Running Tasks].
For more information, see the following.
NOTE |
Even if you click [Execute Now], it may take time for the task to start executing, depending on the execution status of other tasks. |