: Supported 
: Not supportedOptions with Finishing Functions
The option required varies depending on the finishing function you want to use. The list below shows the options available according to the finishing function.
NOTE
For details about how to use the finishing functions, see the following:
Some finishing functions may not be available depending on the paper size and paper type. Paper Usable with Finishing Functions
Options with Sorting Functions
Types of Sorting Functions
Collate
Outputs paper after sorting the copies into sets with the same page order as the original, when you print multiple copies of a multi-page original.
Group
Outputs the specified number of copies after grouping each page of the original together, when you print multiple copies of a multi-page original.
Offset
Offsets the output position per copy or per page.
Rotate 90 Degrees
Outputs the paper after rotating it 90 degrees alternately per copy or per page.
Supported Options
: Supported : Not supportedFunction | Inner Finisher-N | 1st Copy Tray Kit*1 | Copy Tray-T | Inner 2way Tray-M |
Collate*1 | | | | |
Group*1 | | | | |
Offset | | | | |
Rotate 90 Degrees*1 | | | *2 | |
*1This function is standard even on the main unit only.
*2Available only when the 1st copy tray kit is installed.
Options with Stapling Functions
Types of Stapling Functions
Corner
Outputs paper after stapling the corner of the paper for each copy or for a certain number of pages.
Double
Outputs paper after stapling two edges of the paper for each copy or for a certain number of pages.
Staple-Free
Outputs paper after crimping the corner of the paper without using a staple for each copy or for a certain number of pages.
You can easily remove the paper by pressing the crimped part with your finger, which is convenient for saving staples and to temporarily bind paper.
You can easily remove the paper by pressing the crimped part with your finger, which is convenient for saving staples and to temporarily bind paper.
Manual Staple
You can insert printed paper into the slot to manually staple the corner of the paper.
This is convenient when you want to re-staple the original after removing the staple in order to scan the original.
This is convenient when you want to re-staple the original after removing the staple in order to scan the original.
Supported Options
: Supported : Not supportedFunction | Inner Finisher-N | 1st Copy Tray Kit | Copy Tray-T | Inner 2way Tray-M |
Corner | | | | |
Double | | | | |
Staple-Free | | | | |
Manual Staple | | | | |
Options with Punch Functions
Types of Punch Functions
Hole Punch
Outputs paper after punching holes for filing.
Supported Options
: Supported : Not supportedFunction | Inner Finisher-N | 1st Copy Tray Kit | Copy Tray-T | Inner 2way Tray-M |
Hole Punch | *1 | | | |
*1Available only when Inner Puncher-D is installed.