[Adjust Image Quality]

Use this setting to adjust the image quality or print position and for special processing according to the paper used.
* Values in bold red text are the default settings for each item.

[Auto Adjust Gradation]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
Correct the gradations if they are not reproduced correctly during printing or copying. Calibrating the Gradation
[Full Adjust]
[Standard (Plain)]
[For Printer 1200 dpi]
 
[Quick Adjust]

[Correct Shading]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
If the image areas of the printing have uneven density, this correction adjusts the printing so that the density is even. Correcting Uneven Density
[Densitometer Correction]
 
[Visual Correction]
[Adjust (Yellow)]/[Adjust (Magenta)]/[Adjust (Cyan)]/[Adjust (Black)] 
[-6]: -127 to ±0 to +127
[-5]: -127 to ±0 to +127
[-4]: -127 to ±0 to +127
[-3]: -127 to ±0 to +127
[-2]: -127 to ±0 to +127
[-1]: -127 to ±0 to +127
[±0]: -127 to ±0 to +127
[+1]: -127 to ±0 to +127
[+2]: -127 to ±0 to +127
[+3]: -127 to ±0 to +127
[+4]: -127 to ±0 to +127
[+5]: -127 to ±0 to +127
[+6]: -127 to ±0 to +127
[Output Test Page]
[Restore Initial Settings]
[Restore Previous Settings]
 
[Scanner Correction]

[Correct Print Color Shift]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
Correct color mismatching when printed images are blurry or the colors are misaligned. Correcting Color Mismatch

[Black Text Processing for Color]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
When you are scanning originals in color, make adjustments to give priority to reproducing color text that is close to black or making black text easier to see. Adjusting the Reproducibility of Near Black Color Text
[Feeder]*1
7 levels
 
[Platen Glass]
7 levels
*1 May not be displayed depending on the model, the installed options, and other settings.

[Correct Uneven Gloss]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
When uneven gloss occurs on printed images, perform correction to reduce uneven gloss.

* Select [Off] if you do not want to perform correction. Depending on the paper, the productivity of the machine may be reduced if this mode is set to [On].
[Off]
[On]

[Special Processing]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
Use a range of processes to resolve problems that arise due to factors such as the paper type, the material used, or its condition.
[Special Processing]

[Remove Streaks from Scan Area]

[Menu] [Adjustment/Maintenance] [Adjust Image Quality]
Specify whether stained areas are omitted from scanning when streaks are detected during feeder use.

* Note that if soiled areas are not scanned, images and text in soiled areas will also not be scanned. If streak-shaped unscanned areas appear when scanning originals with this set to [On], clean the feeder. Cleaning the Feeder
[Off]
[On]
EJ9S-091