[Maintenance]

Carry out maintenance to clean the machine and control condensation.
* Values in bold red text are the default settings for each item.

[Clean Pressure Roller for Fixing]

[Menu] [Adjustment/Maintenance] [Maintenance]
If printed paper appears dirty, execute [Clean Pressure Roller for Fixing].

[Clean Device]

[Menu] [Adjustment/Maintenance] [Maintenance]
If streaks appear on printed paper, part of the image is missing, or dappling or spotting occurs, execute [Clean Device]. Cleaning the Interior

[Clean Feeder]

[Menu] [Adjustment/Maintenance] [Maintenance]
If wiping and cleaning the feeder does not remedy the problems listed below, perform this operation to clean the feeder. Cleaning the Feeder with Paper
Originals become dirty
Originals frequently jam
Printouts appear smudged after scanning, or copying
* [Clean Feeder] may not be displayed depending on the model, the installed options, and other settings.

[Initialize After Replacing Parts]

[Menu] [Adjustment/Maintenance] [Maintenance]
[Secondary Transfer Outer Roller]
[ADF Maintenance Kit]

[Check Maintenance Methods]

[Menu] [Adjustment/Maintenance] [Maintenance]
[Replacing a Toner Cartridge]
[Replacing the Waste Toner Container]
[Replacing the Drum Unit]
[Replacing the Fixing Assembly]
[Replace ITB Unit]
[Replace Secondary Transfer Outer Roller]
[Replace ADF Maintenance Kit]

[Special Cleaning]

[Menu] [Adjustment/Maintenance] [Maintenance]
When the temperature changes rapidly in the environment where the machine is installed, condensation occurs, which may cause fading or bleeding in images and text. Performing Special Cleaning
EJ9S-093