You can display the ScanGear MF (scanner driver) screen, and configure more detailed scan settings. You can also adjust the scan area and set image correction functions while viewing a preview.
1
Set the original in the device.
If you want to display a preview, set the original on the platen.
2
In the main screen of the MF Scan Utility, select the device you are using from [Scanner].
3
If necessary, click [Settings] and configure detailed settings.
Click [ScanGear] in the [] (Scanning from a computer) sheet → set the relevant items in [Save Settings]/[Application Settings] → click [OK].
NOTE
You can only set the items in [Save Settings]/[Application Settings] from the [Settings] dialog box. You can configure the scan settings in the ScanGear MF screen.
4
In the main screen of the MF Scan Utility, click [ScanGear].
5
Set the items in the ScanGear MF screen where necessary.
For details about the how to configure the settings, refer to ScanGear MF Help.
6
Click [Scan].
Scanning begins.
The scanned image is saved according to the settings.
This site uses cookies to provide its contents and functions and improve their qualities etc. You can find out more about our use of the cookies here. If you select "Reject", only cookies necessary to provide the contents and functions of the site are recorded and stored.