[Basic Settings] Sheet
You can set basic print functions.
Depending on the device you are using, you may not be able to set some of the functions described herein.
[Page Size]
Displays the paper size of the print data prepared in the application.
[Output Size]
Specifies the actual paper size to be printed on. If you select a size that differs from [Page Size], the print data is enlarged or reduced to fit the set page size when printing.
[Custom] > [Custom] Dialog Box
If you select [Custom] in [Page Size] or [Output Size], you can specify a custom paper size to use for printing.
[Copies]
Specifies the number of copies to be printed.
[Orientation]
Specifies the orientation of print data.
[Page Layout]
Specifies how many pages to print on each sheet of paper.
[Page Order]
Specifies the page layout.
[Manual Scaling]
Specifies an enlargement or reduction ratio for printing. If you select [Origin at Center], the print data will be positioned in the center of the paper.
[1-sided/2-sided/Booklet Printing]
Specifies a method for outputting print data.
[Booklet] > [Detailed Settings for Booklet] Dialog Box
Enables you to set detailed settings for booklet printing, such as the binding position.
[Book Opening]
Specifies the direction in which the booklet opens.
[Saddle Stitch Setting]
Prints a booklet folded in half and stapled in the middle.
[Binding Location]
Sets the edge of the paper to bind.
If you change [Orientation] in the [Basic Settings]/[Page Setup] sheet, [Binding Location] is changed to the left or top. The long edge/short edge positional relationship is maintained.
[Finishing]
Sets the order of pages and whether to staple the pages when printing multiple copies.
 |  |  |
Collate | Group | Staple Eco (Staple-Free) |
[Off]
Follows the application setting.
[Collate]
Outputs the specified number of copies in page order.
[Group]
Outputs the specified number of copies with all pages having the same page number grouped together.
[Staple + Collate]/[Eco (Staple-Free) + Collate]/[Staple + Group]/[Eco (Staple-Free) + Group]
Outputs the pages in the order specified for [Collate] or [Group] stapled together. "Eco (Staple-Free)" is a method of fixing pages together without using staples, and can be used when a finisher that supports binding without staples is installed.
[Staple Position] > [Staple Position] Dialog Box
Enables you to set the position of the staple(s).
[Color Mode]
Switches between printing in color or in black-and-white. To detect automatically whether each page should be printed in color or in black-and-white, select [Auto [Color/B&W]].