Setting Output Paper Orientation for the Entire Document

This section describes how to configure the output paper orientation for the entire document.

Note
The output paper orientation setting is saved together with the binder document as the layout setting information of the binder document. If 1-sided printing is configured for the entire document but the following print settings and paper settings are not configured, you can configure the different output paper orientation only for the specified chapter. Setting Output Paper Orientation on a Chapter Basis Staple Hole punch Front Cover Back Cover Sheets Tab Paper For details on how to set 1-sided printing, see the following. Configuring 1-Sided/2-Sided Printings for the Entire Document

Note

The output paper orientation setting is saved together with the binder document as the layout setting information of the binder document.

If 1-sided printing is configured for the entire document but the following print settings and paper settings are not configured, you can configure the different output paper orientation only for the specified chapter.

Setting Output Paper Orientation on a Chapter Basis

Staple

Hole punch

Front Cover

Back Cover

Sheets

Tab Paper

For details on how to set 1-sided printing, see the following.

Configuring 1-Sided/2-Sided Printings for the Entire Document

In addition, refer to the following as necessary.

Cautions and Restrictions

Select the output paper orientation you want to set from [Output Paper Orientation] in the [Print Settings] tab in the Print Settings Pane.

The preview area is updated according to the selected output paper orientation.