Setting Output Paper Orientation on a Chapter Basis

Note
The print style setting is saved together with the binder document as the print setting information of the binder document. For more information on how to configure the output paper orientation for the entire document, see the following. Setting Output Paper Size for the Entire Document For more information on how to configure 1-sided print settings for the entire document, see the following. Configuring 1-Sided/2-Sided Printings for the Entire Document For more information on how to cancel the settings on a chapter basis, see the following. Canceling Chapter Settings

Note

The print style setting is saved together with the binder document as the print setting information of the binder document.

For more information on how to configure the output paper orientation for the entire document, see the following.

Setting Output Paper Size for the Entire Document

For more information on how to configure 1-sided print settings for the entire document, see the following.

Configuring 1-Sided/2-Sided Printings for the Entire Document

For more information on how to cancel the settings on a chapter basis, see the following.

Canceling Chapter Settings

If 1-sided printing is configured for the entire document but the following print settings and paper settings are not configured, you can configure the different output paper orientation only for the specified chapter.

Staple

Hole punch

Front Cover

Back Cover

Sheets

Tab Paper

This section describes how to specify the orientation of output paper for only selected chapters that is different from the setting for the entire document.

In addition, refer to the following as necessary.

Cautions and Restrictions

Select

(chapter) to select the chapter for which you want to configure the output paper orientation in the [Page Tree] list in the Navigation Pane.

If the [Page Tree] list is not displayed, see the following.

Displaying the Navigation Pane of Document Binder

Click

(Chapter Settings) on the Toolbar.

Or, follow the procedure below.

Select the [Document] menu > [Chapter Settings].

Right-click a chapter name for which you want to change the settings on the [Page Tree] list, and select [Chapter Settings].

The [Chapter Settings] dialog box is displayed.

Note
If buttons are not displayed on the Document Binder Toolbar, set the buttons on the Toolbar. For more information, see the following. Setting the Icons Displayed in the Document Binder Toolbar

Select the [Specify output paper for selected chapter] check box in the [Layout Settings] tab.

Select the output paper orientation you want to set from [Output Paper Orientation].

Click [OK].

Note
If you set the output paper orientation for a chapter, the chapter icon displayed in the [Page Tree] list changes to the icon and the chapter name changes to blue.