Document Insertion Unit-M1

If the Add Cover, Insert Sheets, Job Separator, or Booklet mode is set, you can use the paper loaded in the document insertion unit as a cover or sheet insertion. If the Document Insertion Unit-M1 is attached to the Finisher-AM1/Saddle Finisher-AM2, you can use paper different to the main document pages for a cover or sheet insertion.

Parts and Their Functions

1.
Upper Tray
You can load paper you want to use as a cover, sheet insertion, or job separator, etc.
2.
Lower Tray
You can load paper you want to use as a cover, sheet insertion, or job separator, etc.
3.
Tray Cover
Lift to load paper in the lower tray.
4.
Slide Guides
Adjust the slide guides to match the width of the original.
5.
Front Cover
Open this cover to remove jammed paper. (See "Document Insertion Unit-M1 (Optional).")

Insertion Unit

Document Insertion

If the Add Cover, Insert Sheets, Job Separator, or Booklet mode is set, you can use the paper loaded in the Document Insertion Unit-M1 as a cover or sheet insertion. If the Document Insertion Unit-M1 is attached to the Finisher-AM1/Saddle Finisher-AM2, you can use paper different to the main document pages for a cover or sheet insertion.
IMPORTANT
Paper which has been rolled or curled must be straightened out before placing it into the Document Insertion Unit-M1. (See "Caution for Paper Curl.")
Do not place the following types of paper into the Document Insertion Unit-M1. Doing so may cause a paper jam.
Insertion sheets with tears
Severely curled or wrinkled paper
Clipped or stapled insertion sheets
Transparencies or other highly transparent insertion sheets
Labels
Envelope
Some types of paper cannot be used with the Document Insertion Unit-M1. For more information, contact your local authorized Canon dealer.
NOTE
For information on the available paper, see "Available Paper Stock."

Document Insertion Unit Staple Settings and Output Results Table

How to Place the Cover Sheet/Original
Staple Settings/Output
Result
Document Insertion Unit-M1*1
Feeder
Platen Glass
Corner: Upper Left
Double: Left
A4
Corner: Lower Left
Double: Left
A3
Corner: Upper Right
Double: Right
A3
Corner: Lower Left
Double: Left
A4
Corner: Upper Right
Double: Right
A4
Corner: Upper Left
Double: Left
A3
Corner: Upper Right
Double: Right
A4
Corner: Upper Left
A3
Corner: Lower Right
A3
Corner: Upper Left
A4
Corner: Lower Right
A4
Corner: Upper Right
Double: Right
A3
Saddle Stitch
*1 Paper can be loaded into both the upper and lower trays. Load the paper facing the same side for both the upper and lower trays.
NOTE
For instructions on loading paper into the Document Insertion Unit-M1, see "Loading Paper into the Document Insertion Unit-M1 (Optional)."
0L3U-044