Setting a Department ID and PIN Beforehand

0C1Y-212
You can save a department ID and PIN in the ScanGear Tool, so that the saved department ID and PIN are automatically used for authentication when scanning.
1
Start ScanGear Tool → select the scanner.
For details, see "Selecting the Scanner."
2
Confirm that [Enabled] is displayed for [Dept. ID Management] → click [Dept. ID Settings].
3
Select [Save PIN] → enter the department ID and PIN → click [OK].
If a PIN has not been set at the scanner, leave the PIN setting blank.
4
Click [Exit] in the ScanGear Tool.
NOTE
The window displayed may vary according to the operating system etc.
The descriptions and explanations herein are given using images from Color Network ScanGear.

Find manuals for other products
imageRUNNER ADVANCE 400iF 500iF
User's Guide (Product Manual)
USRMA-0099-00Copyright CANON INC. 2015