IPv4 Settings

For details on the procedure before displaying the [TCP/IP Settings] page (the procedure before Step 1), see "Configuring the Protocol Settings."
1
Click [Edit] in [IPv4 Settings].
2
Set the IP address.
When obtaining the IP address automatically
Use DHCP, BOOTP, RARP, or Auto IP to obtain the IP address automatically.
[Select Protocol]
[Off]
An IP address that uses RARP, BOOTP, or DHCP cannot be obtained automatically.
[DHCP]
Obtains an IP address using DHCP. (The DHCP server needs to be running.)
[BOOTP]
Obtains an IP address using BOOTP. (The BOOTP daemon needs to be running.)
[RARP]
Obtains an IP address using RARP. (The RARP daemon needs to be running.)
[Auto IP]
[Off]
An IP address that uses Auto IP cannot be obtained automatically.
[On]
The printer obtains the IP address automatically.
When setting the IP address manually
Allows you to directly set the IP address manually.
[Select Protocol]
Select [Off].
[Auto IP]
[IP Address]
Enter the IP address of the printer.
[Subnet Mask]
Enter the subnet mask that is used on the TCP/IP network.
[Gateway Address]
Enter the gateway address that is being used on the TCP/IP network.
3
Specify the DNS.
Proceed to Step 4 when not using DNS.
[Primary DNS Server Address]
Enter the IP address of the primary DNS server.
[Secondary DNS Server Address]
Enter the IP address of the secondary DNS server.
[Host Name]
Enter the host name to be added to the DNS server. You can enter up to 47 single-byte alphanumeric characters.
[Domain Name]
Enter the name of the domain to which the printer belongs. You can enter up to 47 single-byte alphanumeric characters.
Input Example: "example.com"
[DNS Dynamic Update]
To use the DNS Dynamic Update function, select the check box.
[DNS Dynamic Update Time]
Specify the interval at which to perform the dynamic update.
4
Specify the mDNS.
Proceed to Step 5 when not using mDNS.
[Use mDNS]
To use mDNS settings, select the check box.
[mDNS Name]
Enter the mDNS name.
5
Specify the DHCP options.
Proceed to Step 6 when not using DHCP options.
[Acquire Host Name]
To obtain the host name from the DHCP server, select the check box.
[DNS Dynamic Update]
To dynamically update the obtained host name, select the check box.
6
Click [OK].
7
Restart the printer.
Turn the printer OFF, make sure that the Main Power indicator is off, wait for 10 seconds or longer, and then turn it ON again.
After the printer is restarted, the settings become effective.
0F40-059