IPv6 Settings

Specify the IPv6 settings after specifying the IPv4 settings.
For details on the procedure before selecting the settings (the procedure before Step 1), see "Configuring the Protocol Settings."
1
Click [Edit] in [IPv6 Settings].
2
Select the [IPv6] check box.
3
Specify the stateless address.
Proceed to Step 4 when not using a stateless address.
[Stateless Address]
To use a stateless address, select the check box.
4
Specify the manual address.
Proceed to Step 5 when not using a manual address.
[Manual Address]
To use a manual address, select the check box.
[IP Address]
Enter the IP address of the printer.
[Prefix Length]
Enter the prefix length.
[Default Router Address]
Enter the default router address as needed.
IMPORTANT
Addresses that cannot be entered in [IP Address] and [Default Router Address]
Addresses that begin with "ff" (multicast address)
"::1" (loopback address)
5
Specify DHCPv6.
Proceed to Step 6 when not using DHCPv6.
[Use DHCPv6]
To use DHCPv6, select the check box.
6
Specify the DNS.
Proceed to Step 7 when not using DNS.
[Primary DNS Server Address]
Enter the IP address of the primary DNS server.
[Secondary DNS Server Address]
Enter the IP address of the secondary DNS server.
[Use IPv4 Host/Domain Names]
To use the same name as IPv4, select the check box.
[Host Name]
Enter the host name to be added to the DNS server. You can enter up to 47 single-byte alphanumeric characters.
[Domain Name]
Enter the name of the domain to which the printer belongs. You can enter up to 47 single-byte alphanumeric characters.
Input Example: "example.com"
[DNS Dynamic Update]
To use the DNS Dynamic Update function, select the check box.
[Register Manual Address]
To register a manual address to the DNS server, select the check box.
[Register Stateful Address]
To register a stateful address to the DNS server, select the check box.
[Register Stateless Address]
To register a stateless address to the DNS server, select the check box.
[DNS Dynamic Update Time]
Specify the interval at which to perform the dynamic update.
7
Specify the mDNS.
Proceed to Step 8 when not using mDNS.
[Use mDNS]
To use mDNS settings, select the check box.
[Use IPv4 name for mDNS]
To use the same name as IPv4, select the check box.
[mDNS Name]
Enter the mDNS name when not selecting the [Use IPv4 name for mDNS] check box.
8
Click [OK].
9
Restart the printer.
Turn the printer OFF, make sure that the Main Power indicator is off, wait for 10 seconds or longer, and then turn it ON again.
After the printer is restarted, the settings become effective.
0F40-05A