Setting the Receiving Machine

Restricting the Reception of Device Information
Restoring Device Information
Restricting the Type of Information That Is Updated
NOTE
You can return device information only to what it was at the time of the very last update.
While receiving and updating device information, the screen indicating that the settings are being updated appears. Operations on this machine cannot be performed until the update completes.

Restricting the Reception of Device Information

To "Settings/Registration Table."
You can restrict the reception of device information delivered from other model machines, besides the imageRUNNER ADVANCE C2030/C2020, which have the Device Information Delivery Settings mode.
1.
Press (Settings/Registration).
2.
Press [Management Settings] → [Device Management] → [Device Information Delivery Settings].
3.
Press [Restrict Receiving Device Information] for <Receiving Settings> → press [On] → [OK].
If you do not want to restrict the reception of device information, press [Off].
4.
Press [OK].

Restoring Device Information

To "Settings/Registration Table."
You can restore device information to what it was before it was updated. This is useful when you have accidentally updated the device information.
1.
Press (Settings/Registration).
2.
Press [Management Settings] → [Device Management] → [Device Information Delivery Settings].
3.
Press [Restore Data] under <Receiving Settings>.
4.
Select the information to restore → press [Start].
IMPORTANT
You cannot restore the settings of Workflow Composer to what they were before the device information was updated.
If you do not restore [Settings/Registration Value] and [Address Book] at the same time, [URL Send Settings] in [Set Fax/I-Fax Inbox] may be erased.
5.
Press [Yes].
6.
Press [OK] → [OK].

Restricting the Type of Information That Is Updated

To "Settings/Registration Table."
You can set whether the machine receives and updates the delivered device information.
1.
Press (Settings/Registration).
2.
Press [Management Settings] → [Device Management] → [Device Information Delivery Settings].
3.
Press [Restrict Receiving for Each Function] under <Receiving Settings> → specify the various settings → press [OK].
Press [On] for an item to set the machine to not receive and update that device information.
NOTE
Before setting <Settings/Registration Value>, <Dept. ID>, or <Address Book> to 'Off', it is necessary to set a default key in [Preferences] (Settings/Registration). (See "Changing the Key Pair Used With SSL Encrypted Communications.")
4.
Press [OK].