Collating Copies

You can sort copies into sets arranged in page order.
This function is useful when making handouts for meetings.
<Off>
Printouts of a complete job are grouped.
For example, if you are copying three copies of a three-page document, printouts of a complete job are grouped and arranged in this page order: "1, 1, 1", "2, 2, 2", "3, 3, 3."
<On>
Printouts of a complete job are collated.
For example, if you are copying three copies of a three-page document, printouts of a complete job are grouped and arranged in this page order: "1, 2, 3", "1, 2, 3", "1, 2, 3."
NOTE
Combine functions:
You can use collating together with the following functions.
"Adjusting the Density"
"Selecting the Original Type"
"2-Sided Copying"
"Enlarging/Reducing Copies"
"2 on 1/4 on 1"
"Different Size Originals"
"Book→2 Pages"
"Erase Frame"
1
Place documents.
"Placing Documents"
"Supported Document Types"
2
Display the Copy mode screen.
Press [] (COPY/SCAN) to switch to the Copy mode screen.
3
Press [] or [] to highlight <Collate: Off>, and then press [OK].
4
Press [] or [] to highlight <On>, and then press [OK].
5
Enter the required number of copies.
Enter the copy quantity (1 to 99) using numeric keys.
Press [] (Clear) to cancel the entered quantity.
6
Press [] (Start).
When your document is placed on the platen glass:
(1)
Set the next document and press [] (Start).
Repeat these steps until all documents are scanned.
(2)
Press [] or [] to highlight <Finish Scanning>, and then press [OK].
0J04-07C