Adjustment/Maintenance

Adjustment/Maintenance: Adjust Image Quality

Item
Setting Description
Default
Setting
Can be set in
Remote UI
Device Information
Delivery Available
[Auto Adjust Gradation]
When [Full Adjust] is set (test printing is performed):
Paper Select, Start Printing Key (three times), Start Scanning Key (three times)
When [Quick Adjust] is set (test printing is not performed):
StartKey
-
No
No
[Correct Density]
Copy/Scan and Store (Mail Box), B&W Scan for Send/Scan and Store (Excl. Mail Box), Color Scan for Send/Scan and Store (Excl. Mail Box): 9 levels each
5 levels
No
No
[Correct Shading]
Densitometer Correction, Visual Correction
-
No
No
[Auto Correct Color Mismatch]
Start
-
No
No
[Full Color Printing Vividness Settings]
Standard, Level 1, Level 2
Standard
No
No
[Fine Adjust Zoom]
X: -1.0% to +1.0%, in 0.1% increments
Y: -1.0% to +1.0%, in 0.1% increments
X: 0%
Y: 0%
No
No
[Dither Pattern Settings]
Pattern 1, Pattern 2
Pattern 1
No
No
[Adjust Toner Volume Used for Color Printing]
Off, Level 1, Level 2
Off
No
No
[Fill Area Image Adjustment Mode]
Mode 1, Mode 2, Mode 3
Mode 2
No
No

Adjustment/Maintenance: Adjust Action

Item
Setting Description
Default Setting
Can be set in Remote UI
Device Information Delivery Available
[Saddle Stitch Staple Repositioning]*1
Start key
-
No
No
[Change Fold/Stitch Position]*1
-2.0 mm to +2.00 mm, in 0.25 mm increments
0.00 mm
No
No
[Time Until Stapling Starts in Stapler Mode]*1
1 to 5 Seconds
3 sec.
No
No
*1
Indicates items that appear only when the appropriate optional equipment is available for use.

Adjustment/Maintenance: Maintenance

Item
Setting Description
Default
Setting
Can be set in
Remote UI
Device Information
Delivery Available
[Clean Inside Main Unit]
Start key
-
No
No
[Clean Feeder]
Start key
-
No
No
[Initialize After Replacing Parts]
[ADF Maintenance Kit]
Yes, No
-
No
No
12HJ-059