Printed Data Lies outside Paper

113H-0LU
Perform one of the following solutions according to the cause.

<Cause 1> When the following settings in the [Select Feeder] menu are set to [Mixed Sizes], custom size paper whose long edges are 297.0 mm or less is loaded in landscape orientation and printed (only when the UFR II printer driver is used).

Size of the paper in the multi-purpose tray
Drawer N (N = 1, 2, 3, 4) size
Solution
Load the paper in portrait orientation, and then print again.

<Cause 2> When the UFR II printer driver was not used, custom size paper was loaded in portrait orientation to be printed.

Solution
Load the paper in landscape orientation, and then print again.

<Cause 3> Paper of the size smaller than the data size is loaded (LBP843Cx only).

Solution
Load the paper of the size that matches the data size or print the data in the reduced size that matches the paper size.
"Scaling Documents"

<Cause 4> Paper is not loaded properly in the paper drawer or multi-purpose tray.

Solution
Load the paper properly.
"Loading Paper in the Paper Drawer"
"Loading Paper in the Multi-purpose Tray"

<Cause 5> The printing position is adjusted in [Adj. Start Position].

Solution
The printing position is adjusted in [Adj. Start Position].
"Adjusting the Printing Position for Each Paper Source"

Find manuals for other products
imageCLASS LBP843Cx / LBP841Cdn
User's Guide (Product Manual)
USRMA-0668-022020-04Copyright CANON INC. 2020