Notifying the Recipient of an Incoming Fax by Telephone (Manual Sending)
|
See "Attention (Manual Sending)" in advance.
|
Send a fax manually when
you want to notify the recipient of an incoming fax by telephone
the receiving fax machine cannot receive faxes automatically
1
Connect an external telephone or a handset to the machine.
For more information, see the following.
See the Starter Guide.
2
Place your fax face down, and then adjust the document guides tightly to the width of the document.
3
Press [
] (FAX/COPY) to switch to the Fax mode screen.
] (FAX/COPY) to switch to the Fax mode screen.4
Specify the scan settings.
5
Check for a dial tone via the handset.
Check if you hear the dial tone.
6
Dial the recipient's number.
7
Talk to the recipient through the handset.
If you hear a beep:
Proceed to step 9.
8
Ask the recipient to set his/her fax machine to receive your fax.
When you hear a beep, press [
] (Start), and hang up the handset.
] (Start), and hang up the handset.When the scan is complete, the machine is ready to send your faxes.