Loading Preprinted Paper

When you use paper that has been preprinted with a logo, pay attention to the orientation of the paper when loading. Load the paper properly so that printing is performed on the correct side of the paper with a logo.
 
This section mainly describes how to load preprinted paper with the proper facing and orientation. For the general procedure for loading paper in the paper drawer, multi-purpose tray, optional paper deck, or optional envelope feeder, see the following.

Making 1-Sided Printouts on Paper with Logos

Printing on Paper with Logos in Portrait Orientation
When loading paper in the paper drawer or paper deck
Load the paper with the logo side (the side to print the document) face down.
When loading paper in the multi-purpose tray or envelope feeder
Load the paper with the logo side (the side to print the document) face up.
Printing on Paper with Logos in Landscape Orientation
When loading paper in the paper drawer or paper deck
Load the paper with the logo side (the side to print the document) face down.
When loading paper in the multi-purpose tray or envelope feeder
Load the paper with the logo side (the side to print the document) face up.

Making 2-Sided Printouts on Paper with Logos

When a document to print consists of an odd number of pages, set <Alternative Method> to <Off> in the setting menu of the operation panel. Alternative Method
Printing on Paper with Logos in Portrait Orientation
When loading paper in the paper drawer or paper deck
Load the paper with the front logo side (the side to print the first page of the document) face up.
When loading paper in the multi-purpose tray
Load the paper with the front logo side (the side to print the first page of the document) face down.
Printing on Paper with Logos in Landscape Orientation
When loading paper in the paper drawer or paper deck
Load the paper with the front logo side (the side to print the first page of the document) face up.
When loading paper in the multi-purpose tray
Load the paper with the front logo side (the side to print the first page of the document) face down.
The <Paper Feed Method> setting
When you print on preprinted paper, you need to change the facing of the paper to load each time you switch between 1-sided and 2-sided printing. However, if <Paper Feed Method> is set to <Print Side Priority>, the facing that you use for loading preprinted paper for 2-sided printing (logo side face up for paper drawer or down for multi-purpose tray) can also be used for 1-sided printing. This setting is especially useful if you frequently perform both 1-sided and 2-sided printing. Paper Feed Method
0X7U-011