Saving Documents Directly in Shared Folder/FTP Server

This section describes how to scan documents and save them to a shared folder or FTP server directly from the machine. Scanned documents are saved as JPEG images, PDF files or in other digital file formats.
To save documents directly to a shared folder or FTP server, you must complete preparations in advance, including specification of the save destination.
Configuring the Machine for Scanning to Shared Folders
Configuring the Machine for Scanning to FTP Server
Available destinations for shared folders/FTP servers are limited to the destinations registered in the Address Book. To specify a destination using the Address Book, it is necessary to register that destination before scanning the relevant folder/FTP server.
Setting a Shared Folder as a Save Location
Registering Destinations in the Address Book from Remote UI
You can only specify one destination at a time.
1
Place the document(s). Placing Documents
2
Press  and tap <Scan>.
When the logon screen appears, use the numeric keys to enter the user name and password. Then select the authentication server and press . Logging on to Authorized Send.
3
Tap <File>.
4
Select a destination from the Address Book.
For instructions on how to use the Address Book, see Specifying from Address Book .
Selecting destinations directly by entering coded dial numbers. You can also specify previously used destinations.
Selecting Destinations Directly by Entering Coded Dial Numbers
Specifying Previously Used Destinations
5
Specify the scanning settings as necessary.
Tap the settings. Specifying Detailed Settings
The file name of a scanned document is automatically assigned based on the following format: "communication management number (four digits)_sent date and time_document number (three digits).file extension name."
Example of file names: If a one-page document is converted into a PDF file and sent on October 17, 2015 at 07:00:05 P.M.
"0045_151017190005_001.pdf"
You cannot specify file names yourself.
6
Press  to start scanning.
Scanning of the document starts.
To cancel scanning, tap <Cancel>  <Yes>. Canceling Sending Documents (E-Mail/Shared Folder/FTP Server)
When placing documents in the feeder in step 1
When scanning is complete, the documents are scanned to the shared folder or FTP server.
When placing documents on the platen glass in step 1
If the <File Authentication> screen is displayed
Enter the user name and password with the numeric keys, and tap <Apply>.
If you always want to scan with the same settings: Changing Default Settings
If you want to register a combination of settings to use when needed: Registering Frequently Used Scan Settings (E-Mail/I-Fax/Shared Folder/FTP Server)
0UX0-05L