Loading Preprinted Paper
When you use paper that has been preprinted with a logo, pay attention to the orientation of the paper when loading it in the paper source. Load the paper properly so that printing is performed on the same side as the logo.
|
This section describes how to load preprinted paper with the proper orientation. For a description of the general procedure for loading paper in the paper drawer or multi-purpose tray, see Loading Paper in the Paper Drawer or Loading Paper in the Multi-Purpose Tray.
The orientation of the paper may vary depending on the settings in <Switch Paper Feed Method>.
|
Loading Paper with Logos in Portrait Orientation
The loading method varies depending on the size of the paper with the logo and the paper source that is used.
When Loading A4-, LTR-size Paper with Logos
Load the paper so that the logo faces up in the paper drawer and faces down in the multi-purpose tray, as shown in the illustrations below.
|
Paper drawer
|
Multi-purpose tray
|
 |
 |
Pay attention to the orientation when placing a document. Place as follows, with the document facing up in the feeder and facing down on the platen glass.
|
Feeder
|
Platen glass
|
 |
 |
When Loading A3-, 11" x 17", LGL-size Paper with Logos
Load the paper so that the logo faces up in the paper drawer and faces down in the multi-purpose tray, as shown in the illustrations below.
|
Paper drawer
|
Multi-purpose tray
|
 |
 |
Pay attention to the orientation when placing a document. Place as follows, with the document facing up in the feeder and facing down on the platen glass.
|
Feeder
|
Platen glass
|
 |
 |
Loading Paper with Logos in Landscape Orientation
The loading method varies depending on the size of the paper with the logo and the paper source that is used.
When Loading A4-, LTR-size Paper with Logos
Load the paper so that the logo faces up in the paper drawer and faces down in the multi-purpose tray, as shown in the illustrations below.
|
Paper drawer
|
Multi-purpose tray
|
 |
 |
Pay attention to the orientation when placing a document. Place as follows, with the document facing up in the feeder and facing down on the platen glass.
|
Feeder
|
Platen glass
|
 |
 |
When Loading A3-, 11" x 17", LGL-size Paper with Logos
Load the paper so that the logo faces up in the paper drawer and faces down in the multi-purpose tray, as shown in the illustrations below.
|
Paper drawer
|
Multi-purpose tray
|
 |
 |
Pay attention to the orientation when placing a document. Place as follows, with the document facing up in the feeder and facing down on the platen glass.
|
Feeder
|
Platen glass
|
 |
 |