Viewing Network Settings

The IP address is not correctly configured if it is displayed as "0.0.0.0".
Connecting the machine to a switching hub or bridge may result in a connection failure even when the IP address is correctly configured. This problem can be solved by setting a certain interval before the machine starts communicating. Setting a Wait Time for Connecting to a Network
You can print a list of the current network settings. User Data List/System Manager Data List

Viewing IPv4 Settings

  <Network Information>  <IPv4>  Select the setting to view

Viewing IPv6 Settings

 <Network Information>  <IPv6>  Select the setting to view

Viewing the MAC Address

1
Tap <Menu> in the Home Screen.
2
Tap <Network Settings>.
If a screen for entering a System Manager ID and PIN is displayed, enter the System Manager ID and PIN, tap <Apply>, and press Setting the System Manager ID (imageRUNNER 2204F / 2204N / 2004N)
3
Tap <Ethernet Driver Settings>.

Viewing Wireless LAN Settings and Information

1
Tap <Menu> in the Home Screen.
2
Tap <Network Settings>.
If a screen for entering a System Manager ID and PIN is displayed, enter the System Manager ID and PIN, tap <Apply>, and press . Setting the System Manager ID (imageRUNNER 2204F / 2204N / 2004N)
3
Tap <Wireless LAN Settings>.
If the <Do you want to enable the wireless LAN?> message is displayed, tap <Yes>.
4
Read the message that is displayed, and tap <OK>.
5
Tap <Wireless LAN Information>.
6
Select the setting to view.
Viewing WEP and WPA/WPA2-PSK information
1
Tap <Security Settings>.
2
Confirm and tap the current security setting.
If the security settings are not configured, <None> is displayed.
3
Select the setting to view.
 
WEP
 
WPA/WPA2-PSK
 
 
 
 
 
<Wireless LAN Status> and <Latest Error Information> can be viewed from . Press  <Network Information>  <Wireless LAN Information> and select the setting to view.
1053-053